2013 CAN-AM Spyder

MY ISSUE IS WITH 2013 CANAM SPYDER. AFTER ENGINE REACHES NORMAL OPERATING TEMPERATURE, THE AREA AROUND THE DRIVERS LEGS ARE EXPOSED TO 208 DEGREES F. THIS DATA WAS COLLECTED AT THE DEALERSHIP INJACKSONVILLE. THE CONTINUED EXPOSURE TO THIS DEFECT HAS CAUSED FIRST DEGREE BURNS ON MY WIFE'S LEGS. EVEN WHEN WARING THICK BLUE JEANS, EXTENDED RUN TIMES BURNT HER LEG TOO. THE COMPANY HAS APPARENTLY CORRECTED THIS ISSUE IN 2014. THEY HAVE RE ROUTED HOT AIR WITH DIFFERENT PANELS, REVERSING THE FAN AT SLOW SPEED AND STOP AND BETTER INSULATION. OBVIOUSLY, BRP KNOWS THERE IS A REAL PROBLEM. IT TOOK ME AND MY SERVICE TO BOTH FILE COMPLAINTS. HOWEVER, BRP AS OF TODAY WILL EXCHANGE OUT MY PANELS TO THE NEW REDESIGNED PANEL. A $600 PER SIDE MODIFICATION. ALSO, BE WARE, AFTER A LONG RUN ADDING GAS IS SCARY, IT'S A VERY HOT ENVIRONMENT AND THE DRIVER IS SPURTING GAS ON IT? *TR

TL* THE CONTACT OWNS A 2013 CAN-AM SPYDER MOTORCYCLE. WHILE RIDING THE MOTORCYCLE IN VERY HOT WEATHER CONDITIONS, THE CHECK ENGINE WARNING INDICATOR ILLUMINATED IN A BRIGHT ORANGE COLOR, WHICH DISTRACTED THE DRIVER. IN ORDER TO REMOVE THE DISPLAY FROM THE SCREEN, THE VEHICLE HAD TO BE TURNED OFF AND THE KEY HAD TO BE REMOVED AND REPLACED. THE CONTACT NOTIFIED THE MANUFACTURER OF THE DEFECT. THE FAILURE MILEAGE WAS 40.

AFTER I RIDE MY 2013 CAN-AM SPYDER RS IN WARM/HOT OUTDOOR TEMPERATURES FOR AN EXTENDED AMOUNT OF TIME I HAVE SEVERE GAS FUMES. I NOTICE IT MORE WHEN I TURN THE SPYDER OFF AND PARK IT. I ALSO HAVE NOTICED THAT WHEN I RIDE IN THESE TEMPERATURES I HAVE A DIFFICULT TIME FILLING MY SPYDER WITH GAS. WHEN I PUT THE GAS NOZZLE IN THE FILLER HOLE IT CONTINUES TO SHUT THE PUMP OFF AS IF IT IS OVER FILLING. HOWEVER ONCE IT HAVE ADDED ABOUT A GALLON OF COOL GAS TO THE TANK (BY MANUALLY SQUEEZING THE HANDLE MULTIPLE TIMES) IT SEEMS TO PUMP AUTOMATICALLY FINE. TO ME IT SEEMS THAT THE GAS IN THE TANK IS OVERHEATING. I ALSO HAVE AN ISSUE WITH THE BODYWORK ON THE SPYDER GETTING VERY HOT AROUND THE LEG/ENGINE AREA. I'VE HAD TO ADD HEAT RESISTANT INSULATION TO THE INSIDE OF THE PANELS TO BE ABLE TO RIDE THE SPYDER ON DAYS WITH HOT OUTDOOR TEMPERATURES. I HAVE BROUGHT THIS TO MY CAN-AM DEALERS ATTENTION AND THEY HAVE REPLIED (1.) THAT THERE IS NOT AN ISSUE OR (2.) THERE IS NOTHING THAT CAN BE DONE. I AM VERY CONCERNED DUE TO THE SPYDERS I HAVE SEEN THAT ARE CATCHING ON FIRE. I AM FILING THIS COMPLAINT IN HOPE THAT THERE IS SOMETHING YOU CAN DO TO HELP US HELPLESS/HOPELESS CAN-AM SPYDER OWNERS. *TR

THE BIKE HAS EXCESSIVE HEAT COMING FROM THE CATALYTIC CONVERTER DIRECTLY UNDER THE FUEL TANK, THE EXCESSIVE HEAT ACTUALLY BOILS THE FUEL IN THE GAS TANK, ONCE LIFTING THE SEAT, THE FUEL GAS CAP IS TOO HOT TO REMOVE, I'VE CONTACTED BRP CARE WITH NO SUCESS AND HAVE ORDERED THE REPLACENT SIDE PANELS AT MY OWN COST, THEY HAVE COVERED SOME UNDER WARRANTY BUT NOT ALL ARE GETTING THIS OPTION, THE DEALERSHIP IS AWARE OF THE PROBLEM BUT THEIR HANDS ARE TIED AND CAN'T DO ANYTHING WITHOUT BRP''S APPROVAL. PLEASE FORCE A RECALL OF THE ENTIRE EXHAUST SYSTEM ON ALL 2013 AND 2014 ST'S AND RT'S, THIS IS A MAJOR PROBLEM AND NOTHING IS BEING DONE TO FIX THE PROBLEM, THERE HAVE BEEN NUMEROUS FIRES AS A RESULT OF THE DESIGN FLAW. THANK YOU. *JS

TL* THE CONTACT OWNS A 2013 CAN-AM SPYDER. WHILE DRIVING 70 MPH, THE MOTORCYCLE OVERHEATED, WHICH BURNED A HOLE THROUGH THE SIDE OF THE VEHICLE AND THE CONTACT'S PANTS. THE CONTACT WAS UNINJURED. THE DEALER STATED THAT A STUCK PURGE VALVE NEEDED TO BE REPLACED. THE MOTORCYCLE WAS REPAIRED AND THE MANUFACTURER WAS NOTIFIED. THE FAILURE MILEAGE WAS 10,400.

VEHICLE HAS NO MEANS OF RELEASING HEAT TRAPPED UNDER PLASTIC PANELING WHEN AT LOW SPEEDS OR WHEN VEHICLE IS STOPPED. HAD TWO BREAKDOWNS AT STOP AND GO SITUATIONS WHERE THE VEHICLE WAS NOT MOVING ALLOWING HEAT TO ESCAPE. THIS AFFECTED OTHER COMPONENTS (EVAPORATOR CANISTER...ECT) WHICH CAUSE FAILURE AND RENDERS THE VEHICLE UNSAFE. HAVING CONVERSATIONS WITH BRP I KNOW THEY ARE AWARE AND HAVE NO SOLUTION. THIS IS NOT AN ISOLATED INCIDENT BRP NOW HAS COME OUT WITH THE 2014 MODEL AND CLEARLY STATES IN ITS ADVERTISING CAMPAIGN THAT "ON OUR NEW MODELS WE ADDRESS THE HEAT ISSUE" SO YOU KNOW YOU HAVE IT... AND YOU FIXED IT ON THE NEWER MODELS WHILE BEHIND YOU LIES CUSTOMERS WITH OLDER MODELS THAT ARE CLEARLY DEFECTIVE AND QUITE UNSAFE... *TR

THIS VEHICLE HAS AN EXTREMELY DANGEROUS HEAT PROBLEM. HEAT BUILDS UP UNDER THE FIBERGLASS PANELS WHICH RESULTS IN THE GAS CAP BECOMING TOO HOT TO TOUCH WITH YOUR BARE HAND, AND GASOLINE BOILING IN THE TANK. ALSO, THE RADIATOR FAN BLOWS VERY HOT AIR ON MY RIGHT FOOT WHICH IS VERY UNCOMFORTABLE. ADDITIONALLY, I CAN SMELL GAS FUMES WHEN RIDING, AND THE FUMES ARE OVERPOWERING WHEN PARKING THE BIKE AFTER RIDING. I LEAVE THE BIKE OUTSIDE MY GARAGE UNTIL THE FUMES DISSIPATE, AS I FEEL THAT IT DANGEROUS TO PARK IN THE GARAGE WITH THE OVERPOWERING GAS FUMES. BRP AND THE DEALERS ARE AWARE OF THESE PROBLEMS, AND CAN OFFER NO FIX FOR THEM. THESE PROBLEMS HAVE BEEN ADDRESSED IN THE 2014 MODELS, SO OBVIOUSLY THERE IS A WAY TO REMEDY THEM. WHENEVER I AM ASKED HOW I LIKE THE BIKE, I TELL PEOPLE THAT THE GAS MILEAGE IS HORRENDOUS, THE HEAT PROBLEM IS UNCOMFORTABLE, AND THE GAS FUMES ARE UNBEARABLE AND DANGEROUS. I ADVISE THEM NOT TO BUY THIS VEHICLE. *TR

HERE IS A LIST OF ISSUES WITH MY MOTORCYCLE, AND HUNDREDS OF CAN AM OWNERS 1- GAS SMELL 2- GAS BOILING AFTER RIDING 3- OVERHEATING, BURNING IF YOU TOUCH IT BOMBARDIER IS NOT FIXING IT, BUT THEY CHANGE THE DESIGN ON THE 2014 WITH NEW VENTS AND THEY ARE ASKING US TO PAY FOR THE FIX. MY BIKE IS SO HOT THAT MY WIFE HAVE ASK ME NOT TO RIDE ANYMORE, SHE ALSO ASK ME TO TO TAKE THE KIDS OR HER FOR RIDES BECAUSE OF THE SAFETY ISSUES, IF YOU CHECK ON THE SPYDERLOVER.COM FORUM YOU WILL SEE THAT BRP IS NOT DOING ANYTHING TO HELP THE HEAT ISSUES WE HAVE, MANY CALLS AND VISITS TO MY DEALER BAY HARBOR MOTORS IN NEW YORK, PLEASE HELP US BEFORE SOMETHING TRAGIC HAPPENS WHEN WE ARE RIDING A DEFECTIVE PRODUCT. *TT