← New search

2009 BMW M3

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all M3 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

39 reports with mileage · 6 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Power Train. Review the 24 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Air Bags. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

1 crash reports0 fire reports0 injury reports

What owners actually said

45 reports
47,500 miles · May 4, 2016
Air Bags

TAKATA RECALL HELLO MADAM/ SIR, I RECEIVED A SAFETY RECALL NOTICE - 16V-071 REGARDING FAULTY DRIVERS SIDE AIRBAGS IN MY 2009 BMW M3. THE NOTICE (ATTACHED) CLEARLY STATES THAT IN AN EVENT OF AIRBAG GETTING DEPLOYED, THE AIRBAG MIGHT EXPLODE CAUSING SERIOUS INJURY OR DEATH.BMW SAYS THAT THEY DON'T HAVE ANY INFORMATION OF WHE…

Read full complaint

TAKATA RECALL HELLO MADAM/ SIR, I RECEIVED A SAFETY RECALL NOTICE - 16V-071 REGARDING FAULTY DRIVERS SIDE AIRBAGS IN MY 2009 BMW M3. THE NOTICE (ATTACHED) CLEARLY STATES THAT IN AN EVENT OF AIRBAG GETTING DEPLOYED, THE AIRBAG MIGHT EXPLODE CAUSING SERIOUS INJURY OR DEATH.BMW SAYS THAT THEY DON'T HAVE ANY INFORMATION OF WHEN NEW PARTS WILL BE AVAILABLE. TO AVOID ANY POTENTIAL ISSUE OF SOMETHING HAPPENING, I HAVE BEEN RENTING A CAR FOR A WHILE. I HAVE ALSO CONTACTED BMW AND HAVE BEEN UNSUCCESSFUL SO FAR TO RECEIVE ANY HELP. BMW TOLD ME THAT BMW DEALERSHIP OF ANN ARBOR WILL CONTACT ME FOR ALTERNATE TRANSPORTATION AND THEN BMW OF ANN ARBOR TOLD ME THAT THEY ARE NOT SUPPORTING THIS RECALL. I HAVE JUST BEEN GOING BACK AND FORTH WITH BMW AND THE DEALERSHIP WITHOUT ANY ASSISTANCE. HOW AM I SUPPOSED TO DRIVE A VEHICLE WHEN THE RECALL CLEARLY STATES THAT EXPLOSION OF AIRBAG MIGHT EVEN CAUSE DEATH? I CAN'T JUST AFFORD TO CONTINUE RENTING A CAR. ANY HELP FROM NHTSA WOULD BE GREATLY APPRECIATED. I AM HAPPY TO PROVIDE MORE INFORMATION. KIND REGARDS, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

NHTSA ODI #10863062

Mileage unknown · Feb 27, 2016
Air BagsSeats

ERROR MESSAGE: FAULT IN - PASSENGER RESTRAIN SYSTEM AFFECTING AIRBAG, BELT TENSIONER, OR BELT FORCE LIMITER. THIS IS CAUSED BY FAULT SEAT MAT SENSOR IN THE PASSENGER SEAT, WHICH MAY CAUSE THE AIRBAG NOT TO FUNCTION PROPERLY.

NHTSA ODI #10838738

140,000 miles · Feb 12, 2016
EngineVehicle Speed Control

S65 V8 ENGINE IN A BMW M3 E90/92/93 AND M5'S WITH A V10 HAS TWO THROTTLE VALVE ACTUATORS THAT FAIL PREMATURELY AT 40-80K MILES. BOTH THE INTERNAL NYLON GEARS AND ELECTRONICS WILL FAIL, AFFECTING ACCELERATOR PEDAL RESPONSE AND CAUSING HESITATION, ESPECIALLY WITH THE DCT TRANSMISSION. THESE PARTS ARE NOT A MAINTENANCE ITEM. WHEN F…

Read full complaint

S65 V8 ENGINE IN A BMW M3 E90/92/93 AND M5'S WITH A V10 HAS TWO THROTTLE VALVE ACTUATORS THAT FAIL PREMATURELY AT 40-80K MILES. BOTH THE INTERNAL NYLON GEARS AND ELECTRONICS WILL FAIL, AFFECTING ACCELERATOR PEDAL RESPONSE AND CAUSING HESITATION, ESPECIALLY WITH THE DCT TRANSMISSION. THESE PARTS ARE NOT A MAINTENANCE ITEM. WHEN FAILED, THE ENGINE MALFUNCTION, EXCESS EMISSIONS, SKID CONTROL, AND ABS BRAKING WARNING LIGHTS ARE TRIGGERED. ENGINE GOES INTO LIMP MODE. THIS IS DANGEROUS WHEN IT HAPPENS WHILE DRIVING IN RAINY, SNOWY, AND ICY ROAD CONDITIONS. THE THROTTLE VALVE ACTUATOR DESIGN DEFECT SHOULD HAVE TRIGGERED A BMW RECALL. REPLACEMENT PARTS ARE $1000-1300 EACH PLUS $1000 LABOR AND HAVE NEVER BEEN REDESIGNED BY BMW/BOSCH. SO THE REPLACEMENT PARTS ARE ALSO DEFECTIVE AND WILL FAIL PREMATURELY. REPAIRS OCCURRED ON DEC. 2012 AT 80K MILES FOR $2000 AND ON JAN. 2016 AT 140K MILES FOR $3000. A BMW M3 AND M5 RECALL AND REDESIGNED PARTS ARE WARRANTED. BMW TECHNICAL SERVICE BULLETINS SHOULD BE ISSUED FOR THIS DESIGN FLAW. 8YR/80KM FEDERAL EMISSIONS WARRANTY SHOULD COVER THESE REPAIRS AS WELL.

NHTSA ODI #10825875

56,729 miles · Sep 18, 2015
Engine

VEHICLE LOST POWER WHILE TAKING A TURN. I WAS ABLE TO RESTART IT AND DRIVE TO A NEARBY PARKING LOT. I DROVE AROUND SLOWLY TO TEST AND NOTICED KNOCKING NOISE FROM THE ENGINE. I ALSO NOTICED ENGINE TEMPERATURE WAS ABOVE NORMAL, NOT QUITE TO THE NEXT MARKER, BUT CLOSE. AT THAT POINT, I HAD THE CAR TOWED TO A BMW SERVICE SHOP. …

Read full complaint

VEHICLE LOST POWER WHILE TAKING A TURN. I WAS ABLE TO RESTART IT AND DRIVE TO A NEARBY PARKING LOT. I DROVE AROUND SLOWLY TO TEST AND NOTICED KNOCKING NOISE FROM THE ENGINE. I ALSO NOTICED ENGINE TEMPERATURE WAS ABOVE NORMAL, NOT QUITE TO THE NEXT MARKER, BUT CLOSE. AT THAT POINT, I HAD THE CAR TOWED TO A BMW SERVICE SHOP. THEIR DIAGNOSIS WAS ROD BEARING FAILURE WHICH LED TO CRANKSHAFT DAMAGE, RESULTING IN AN ENGINE, WITH ONLY 57K MI, THAT IS NO LONGER REUSABLE. I AM NOW FACING ENGINE REPLACEMENT COSTS OF $15-25K.

NHTSA ODI #10765229

36,800 miles · Mar 24, 2015
Electrical System

WHILE TRYING TO EXIT MY E92 2009 M3 FROM INSIDE THE VEHICLE BY DOUBLE PULLING THE HANDLE IT WOULD NOT UNLOCK THE CAR. THE LOCKING BOLT STICKS UP PARTIALLY WHEN YOU PULL THE HANDLE BUT DOESN'T UNLOCK. I HAD TO HIT THE LOCK BUTTON FROM THE DASHBOARD TO UNLOCK THE CAR. THIS IS A SAFETY CONCERN IF YOU ARE PANICKED AND CAN'T GET O…

Read full complaint

WHILE TRYING TO EXIT MY E92 2009 M3 FROM INSIDE THE VEHICLE BY DOUBLE PULLING THE HANDLE IT WOULD NOT UNLOCK THE CAR. THE LOCKING BOLT STICKS UP PARTIALLY WHEN YOU PULL THE HANDLE BUT DOESN'T UNLOCK. I HAD TO HIT THE LOCK BUTTON FROM THE DASHBOARD TO UNLOCK THE CAR. THIS IS A SAFETY CONCERN IF YOU ARE PANICKED AND CAN'T GET OUT OF THE VEHICLE UNDER HEAVY STRESS. *TR

NHTSA ODI #10701509

50,400 miles · Jan 21, 2014
Electrical System

400 MILES OUT OF WARRANTY, THE ELECTRICAL SYSTEM FAULT WARNING BEGAN TO COME ON. WHEN THIS HAPPENS ALL GAUGES BOTTOM OUT QUICKLY THEN RETURN TO NORMAL. SOMETIMES, THE RESTRAINT SYSTEM, EDC OR OTHER WARNINGS WILL START. I DON'T EXPERIENCE ANY PROBLEMS DRIVING THE VEHICLE. THE BATTERY HAS BEEN REPLACED AND ALTERNATOR HAS BEEN T…

Read full complaint

400 MILES OUT OF WARRANTY, THE ELECTRICAL SYSTEM FAULT WARNING BEGAN TO COME ON. WHEN THIS HAPPENS ALL GAUGES BOTTOM OUT QUICKLY THEN RETURN TO NORMAL. SOMETIMES, THE RESTRAINT SYSTEM, EDC OR OTHER WARNINGS WILL START. I DON'T EXPERIENCE ANY PROBLEMS DRIVING THE VEHICLE. THE BATTERY HAS BEEN REPLACED AND ALTERNATOR HAS BEEN TESTED AND IS PERFORMING AS IT SHOULD. WHEN CONNECTED TO THE BMW COMPUTER FOR ERROR CODES IT DOESN'T SHOW ANY CODES OR THAT THE WARNINGS HAVE GONE OFF. I HAVE DRIVEN IT FOR 18000 MILES TRYING TO FIND JUST ONE COMMON THING THAT WILL MAKE THIS HAPPEN. I HAVE FOUND NOTHING TO CAUSE THIS WARNING. IT MAY GO OFF CONSTANTLY ONE DAY AND NOT HAPPEN AGAIN FOR 2 WEEKS. SOMETIMES, AFTER GOING OFF FOR SEVERAL TIMES, THE GAUGES FOR RPM, TEMP WILL DROP TO THEIR LOWEST INDICATIONS AND THE SPEEDOMETER WILL STICK AT WHATEVER THE SPEED IS AT THE TIME. I HAVE EMAILED BMW OF NA AND THEY INFORMED ME THAT THE RECENT RECALL FOR THIS PROBLEM DOES NOT INCLUDE THE M SERIES. I WAS TOLD THAT IT COULD COST UP TOWARDS $5000 TO FIND A LOOSE WIRE. DIDN'T THINK I SHOULD HAVE TO PAY THAT MUCH SINCE IT WAS JUST 400 MILES OUT OF WARRANTY. I DON'T THINK THAT IT IS A LOOSE WIRE BECAUSE I WOULD HAVE NOTICED THAT AS A COMMON FACTOR, LIKE HITTING A BUMP IN THE ROAD. AFTER READING MANY BMW FORUMS, THIS SEEMS TO BE A PROBLEM ASSOCIATED WITH THE M3 AS WELL AS THE OTHER SERIES. *TR

NHTSA ODI #10560764

36,300 miles · Oct 6, 2011
Electrical SystemVehicle Speed ControlCrash

SHORTLY AFTER PURCHASING MY BMW 2009 M3, I NOTICED A RARE BUT VERY DISTURBING PATTERN ON TAKE OFF. I HAD CAR CHECKED IN DEALER AND I WAS TOLD IT WAS LIKELY SECONDARY TO MY DRIVING STYLE! THIS UNCONTROLLED TAKE OFF IS LIKE HI REV AND RAPID ACCELERATION PERIODICALLY ALTERNATING WITH DECELERATION FOR FEW SECONDS. I HAD THIS HAPPEN…

Read full complaint

SHORTLY AFTER PURCHASING MY BMW 2009 M3, I NOTICED A RARE BUT VERY DISTURBING PATTERN ON TAKE OFF. I HAD CAR CHECKED IN DEALER AND I WAS TOLD IT WAS LIKELY SECONDARY TO MY DRIVING STYLE! THIS UNCONTROLLED TAKE OFF IS LIKE HI REV AND RAPID ACCELERATION PERIODICALLY ALTERNATING WITH DECELERATION FOR FEW SECONDS. I HAD THIS HAPPEN PROB A DOZEN TIME SO FAR(36K ON CAR). ON DAY OF MY ACCIDENT, IN STOP AND GO TRAFFIC WITH SPEED LESS THAN 5 MILES PER HOUR, CAR LITERALLY WENT OFF ON ME. IT ACCELERATED TO HIT THE CAR IN FRONT AND THEN MANAGED TO PUSH THE CAR INTO ANOTHER 3 CARS IN FRONT, BEFORE IT CAME TO A STALL. I AM NOT SURE IF IT WAS EXACTLY LIKE MY PREVIOUS EPISODES BECAUSE THE DISTANCE BETWEEN MY CAR AND NEXT CAR WAS SHORT. WHAT I AM SURE IS THAT I HAD NO CONTROL ON CAR. *TR

NHTSA ODI #10428888

2,500 miles · Aug 20, 2010
Power Train

TO WHOM IT MAY CONCERN, I AM VERY HAPPY TO SEE YOUR ORGANIZATION TAKING AN INTEREST IN THIS ISSUE. IT IS A VERY DANGEROUS PROBLEM WITH THIS VEHICLE THAT BMWNA IS WELL AWARE OF, BUT INSISTS THAT IT IS "NORMAL BEHAVIOR" FOR MY CAR/TRANSMISSION. I BROUGHT THE CAR INTO THE DEALER, AND THEY WERE ABLE TO REPRODUCE IT, BUT THEY WERE…

Read full complaint

TO WHOM IT MAY CONCERN, I AM VERY HAPPY TO SEE YOUR ORGANIZATION TAKING AN INTEREST IN THIS ISSUE. IT IS A VERY DANGEROUS PROBLEM WITH THIS VEHICLE THAT BMWNA IS WELL AWARE OF, BUT INSISTS THAT IT IS "NORMAL BEHAVIOR" FOR MY CAR/TRANSMISSION. I BROUGHT THE CAR INTO THE DEALER, AND THEY WERE ABLE TO REPRODUCE IT, BUT THEY WERE TOLD BY BMW THAT THIS WAS "NORMAL BEHAVIOR." THE PROBLEM OCCURS WHEN YOU SLOW DOWN- LIKE FOR A TURN, BUT DO NOT COME TO A COMPLETE STOP. THE DCT TRANSMISSION SEEMS TO HAVE TROUBLE FIGURING OUT WHAT GEAR TO SELECT BECAUSE WHEN YOU STEP ON THE GAS TO ACCELERATE, THERE IS A VERY SIGNIFICANT DELAY IN THE ONSET OF POWER- UP TO 2-3 SECONDS. BY THIS TIME, THE DRIVER IS USUALLY REALLY DIGGING INTO THE THROTTLE. THE TRANSMISSION FINALLY PICKS A GEAR, WHICH RESULTS IN THE CAR SUDDENLY LURCHING FORWARD, SOMETIMES INVOKING THE ANTI-SKIP CONTROL. THE DANGER IN THIS BEHAVIOR OCCURS WHEN MAKING A TURN INTO ON-COMING TRAFFIC AFTER SLOWING DOWN TO AROUND 10-15 MPH. AFTER THE TURN, THE CAR IS POSITIONED IN THE TRAFFIC LANE, BUT YOU HAVE NO POWER TO ACCELERATE INTO THE FLOW OF TRAFFIC. THE ONCOMING CARS ARE NOW CLOSING IN ON YOUR CAR AT A FAST RATE, AND YOU'RE BASICALLY STUCK. THIS SITUATION IS MOST PRONOUNCED IN THE "AUTO" MODE OF THE DCT TRANSMISSION, BUT ALSO OCCURS TO A LESSER DEGREE WHILE IN THE MANUAL MODE WHEN YOU SELECT SECOND GEAR IN PREPARATION FOR THE TURN. IT IS ALSO VERY REPEATABLE IN BOTH MODES. THESE PROBLEMS STARTED OCCURRING AFTER A PREVIOUS RECALL ON THIS TRANSMISSION WHERE THE ENGINE WOULD STALL UNDER HARD BRAKING OR NOT SHIFT UNDER HARD BRAKING. THE RECALL FIXED THAT PROBLEM, BUT INTRODUCED THIS PROBLEM, WHICH OCCURS ALMOST EVERY DAY WHEREAS THE PREVIOUS PROBLEM ONLY OCCURRED DURING A SPECIFIC SITUATION. THANK YOU FOR LOOKING INTO THIS DANGEROUS MATTER. *TR

NHTSA ODI #10350848

5,600 miles · May 27, 2010
Power Train

INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) DEAR [XXX], I AM VERY HAPPY TO SEE YOUR ORANIZATION TAKING AN INTEREST IN THIS ISSUE. IT IS A VERY DANGEROUS PROBLEM WITH THIS VEHICLE THAT BMWNA IS WELL AWARE OF, BUT INSISTS THAT IT IS "NORMAL BEHAVIOR" FOR MY CAR/TRANSMISSION. I B…

Read full complaint

INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) DEAR [XXX], I AM VERY HAPPY TO SEE YOUR ORANIZATION TAKING AN INTEREST IN THIS ISSUE. IT IS A VERY DANGEROUS PROBLEM WITH THIS VEHICLE THAT BMWNA IS WELL AWARE OF, BUT INSISTS THAT IT IS "NORMAL BEHAVIOR" FOR MY CAR/TRANSMISSION. I BROUGHT THE CAR INTO THE DEALER, AND THEY WERE ABLE TO REPRODUCE IT, BUT THEY WERE TOLD BY BMW THAT THIS WAS "NORMAL BEHAVIOR." THE PROBLEM OCCURS WHEN YOU SLOW DOWN- LIKE FOR A TURN, BUT DO NOT COME TO A COMPLETE STOP. THE DCT TRANSMISSION SEEMS TO HAVE TROUBLE FIGURING OUT WHAT GEAR TO SELECT BECAUSE WHEN YOU STEP ON THE GAS TO ACCELERATE, THERE IS A VERY SIGNIFICANT DELAY IN THE ONSET OF POWER- UP TO 2-3 SECONDS. BY THIS TIME, THE DRIVER IS USUALLY REALLY DIGGING INTO THE THROTTLE. THE TRANSMISSION FINALLY PICKS A GEAR, WHICH RESULTS IN THE CAR SUDDENLY LURCHING FORWARD, SOMETIMES INVOKING THE ANTI-SKIP CONTROL. THE DANGER IN THIS BEHAVIOR OCCURS WHEN MAKING A TURN INTO ON-COMING TRAFFIC AFTER SLOWING DOWN TO AROUND 10-15 MPH. AFTER THE TURN, THE CAR IS POSITIONED IN THE TRAFFIC LANE, BUT YOU HAVE NO POWER TO ACCELERATE INTO THE FLOW OF TRAFFIC. THE ONCOMING CARS ARE NOW CLOSING IN ON YOUR CAR AT A FAST RATE, AND YOU'RE BASICALLY STUCK. THIS SITUATION IS MOST PRONOUNCED IN THE "AUTO" MODE OF THE DCT TRANSMISSION, BUT ALSO OCCURS TO A LESSER DEGREE WHILE IN THE MANUAL MODE WHEN YOU SELECT SECOND GEAR IN PREPARATION FOR THE TURN. IT IS ALSO VERY REPEATABLE IN BOTH MODES. THESE PROBLEMS STARTED OCCURING AFTER A PREVIOUS RECALL ON THIS TRANSMISSION WHERE THE ENGINE WOULD STALL UNDER HARD BRAKING OR NOT SHIFT UNDER HARD BRAKING. THE RECALL FIXED THAT PROBLEM, BUT INTRODUCED THIS PROBLEM, WHICH OCCURS ALMOST EVERY DAY WHEREAS THE PREVIOUS PROBLEM ONLY OCCURED DURING A SPECIFIC SITUATION. THANK YOU FOR LOOKING INTO THIS DANGEROUS MATTER. *TR

NHTSA ODI #10332510

2,258 miles · Feb 22, 2010
Power Train

WITH THE DUAL CLUTCH AUTOMATIC TRANSMISSION IN D MODE, WHEN SLOWING FROM 50 OR 60 MPH TO 15-20 MPH THE TRANSMISSION WILL NOT DOWNSHIFT AND STAYS IN 6TH OR 7TH GEAR. EVEN WITH THE ACCELERATOR TO THE FLOOR THE CAR WILL NOT SELECT AN APPROPRIATE GEAR WHICH MAKES THE CAR BARELY ACCELERATE AT ALL CREATING A SAFETY HAZARD. THIS CA…

Read full complaint

WITH THE DUAL CLUTCH AUTOMATIC TRANSMISSION IN D MODE, WHEN SLOWING FROM 50 OR 60 MPH TO 15-20 MPH THE TRANSMISSION WILL NOT DOWNSHIFT AND STAYS IN 6TH OR 7TH GEAR. EVEN WITH THE ACCELERATOR TO THE FLOOR THE CAR WILL NOT SELECT AN APPROPRIATE GEAR WHICH MAKES THE CAR BARELY ACCELERATE AT ALL CREATING A SAFETY HAZARD. THIS CAR HAS LITTLE TO NO TORQUE (BY DESIGN) AT VERY LOW RPMS, AND IT BASICALLY JUST SITS THERE AND DOESN'T MOVE. A DRIVER OFTEN SLOWS LIKE THIS WHEN MAKING A LEFT OR RIGHT HAND TURN AND HAVING THE CAR JUST SIT THERE UNDER THOSE CONDITIONS PRESENTS A HUGE SAFETY ISSUE IN TERMS OF BEING EITHER REAR-ENDED OR BEING HIT BY ONCOMING TRAFFIC. THE ENTIRE NATURE OF THE AUTOMATIC PROGRAM ON THIS CAR IS UNPREDICTABLE; IN SOME CASES IT WILL DOWNSHIFT, IN OTHERS (AS DESCRIBED ABOVE) IT WILL NOT, WHICH ADDS TO THE UNSAFE NATURE OF THIS DEFECT. IT DOES NOT BEHAVE LIKE ANY AUTOMATIC TRANSMISSION I'VE EVER OWNED. THE SOFTWARE CONTROLLING THE TRANSMISSION WAS UPDATED IN DECEMBER 2009. PRIOR TO THAT, IN EITHER MANUAL OR AUTOMATIC MODE THE CAR WOULD DOWNSHIFT INTO A LOWER GEAR, BUT THERE WAS A 1-2 SECOND PAUSE BEFORE ANY POWER WAS DELIVERED (THE ENGINE WOULD NOT "GO" EVEN ACCELERATOR TO THE FLOOR). THIS ISSUE HASN'T RECURRED, BUT THE SITUATION IS STILL NOT RECTIFIED (AS NOTED IN THE DESCRIPTION ABOVE) AS THE "NEW" ISSUE WITH FAILING TO DOWNSHIFT IN D MODES HAS SURFACED. *TR

NHTSA ODI #10312918

Official recalls

5

20V017000 · Air Bags:frontal:driver Side:inflator Module

Jan 15, 2020

BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.

19V472000 · Electrical System; Electrical SYSTEM:12V/24V/48V Battery:cables; Electrical System:wiring:fuses And Circuit Breakers

Jun 19, 2019

BMW of North America, LLC (BMW) is recalling certain 2009 328i and 328xi, 2009-2011 335d, 2008-2012 M3 Coupe and M3 Convertible, and 2008-2011 M3 Sedan vehicles. The connection of the positive battery cable at the fuse box terminal may degrade, resulting in an intermittent loss of electrical power.

Consequence & remedy

Consequence: A loss of electrical power can cause the vehicle to stall, increasing the risk of a crash.

Remedy: BMW will notify owners, and dealers will replace and secure the positive battery cable connector, free of charge. The recall began August 14, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of a previous recall, number 18V-314.

Additional source detail variants (3)

Electrical System:wiring:fuses And Circuit Breakers

BMW of North America, LLC (BMW) is recalling certain 2009 328i and 328xi, 2009-2011 335d, 2008-2012 M3 Coupe and M3 Convertible, and 2008-2011 M3 Sedan vehicles. The connection of the positive battery cable at the fuse box terminal may degrade, resulting in an intermittent loss of electrical power.

Consequence: A loss of electrical power can cause the vehicle to stall, increasing the risk of a crash.

Remedy: BMW will notify owners, and dealers will replace and secure the positive battery cable connector, free of charge. The recall began August 14, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of a previous recall, number 18V-314.

Electrical SYSTEM:12V/24V/48V Battery:cables

BMW of North America, LLC (BMW) is recalling certain 2009 328i and 328xi, 2009-2011 335d, 2008-2012 M3 Coupe and M3 Convertible, and 2008-2011 M3 Sedan vehicles. The connection of the positive battery cable at the fuse box terminal may degrade, resulting in an intermittent loss of electrical power.

Consequence: A loss of electrical power can cause the vehicle to stall, increasing the risk of a crash.

Remedy: BMW will notify owners, and dealers will replace and secure the positive battery cable connector, free of charge. The recall began August 14, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of a previous recall, number 18V-314.

Electrical System

BMW of North America, LLC (BMW) is recalling certain 2009 328i and 328xi, 2009-2011 335d, 2008-2012 M3 Coupe and M3 Convertible, and 2008-2011 M3 Sedan vehicles. The connection of the positive battery cable at the fuse box terminal may degrade, resulting in an intermittent loss of electrical power.

Consequence: A loss of electrical power can cause the vehicle to stall, increasing the risk of a crash.

Remedy: BMW will notify owners, and dealers will replace and secure the positive battery cable connector, free of charge. The recall began August 14, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of a previous recall, number 18V-314.

17V676000 · Electrical System:wiring

Oct 25, 2017

BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.

Consequence & remedy

Consequence: Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.

Remedy: BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.

16V071000 · Air Bags:frontal:driver Side:inflator Module

Feb 5, 2016

BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i xDrive, 335is and M3 Coupes and Convertibles, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i SAVs, 2007-2010 X3 xDrive30i SAVs, 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M SAVs, 2009-2013 BMW X5 xDrive35d SAVs, 2008-2014 X6 xDrive35i, X6 xDrive50i, and X6 M SACs, 2010-2011 BMW X6 xDrive50i SACs and 2008-2011 M3 Sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.

Consequence & remedy

Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.

08V595000 · Power Train:clutch Assembly

Nov 14, 2008

BMW IS RECALLING 2,500 MY 2008-2009 M3 PASSENGER VEHICLES WITH AN OPTIONAL DOUBLE CLUTCH TRANSMISSION. THE PROBLEM INVOLVES THE DOUBLE CLUTCH GEARBOX. IN A SITUATION OF RAPID VEHICLE DECELERATION, THE TRANSMISSION SOFTWARE MAY PERFORM A MULTISTAGE DOWNSHIFT.

Consequence & remedy

Consequence: IN THAT SITUATION, AT LOW VEHICLE SPEEDS, IT IS POSSIBLE FOR THE ENGINE TO STALL INCREASING THE RISK OF A CRASH.

Remedy: DEALERS WILL REPROGRAM THE ENGINE AND TRANSMISSION ELECTRONIC CONTROL UNIT WITH UPDATED SOFTWARE FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 3, 2008. OWNERS MAY CONTACT BMW AT 1-800-831-1117.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.