← New search

2000 BMW K1200LT

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2000 BMW K1200LT do not stand out strongly from the model-year median of 21.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all K1200LT years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

46 reports with mileage · 5 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Power Train. Review the 40 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes, Hydraulic. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Suspension. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

Power Train complaints

40 reports
Clear category filter
87,822 miles · May 9, 2012
Power Train

THE FINAL DRIVE BEARING AND SHIMS AND SEALS FAILED, REQUIRING EXPENSIVE REPAIRS, AND TWO WEEKS WITHOUT RIDING. *TR

NHTSA ODI #10457952

78,500 miles · Feb 29, 2012
Power Train

2000 K1200LT BMW MOTORCYCLE FINAL DRIVE FAILURE. WHEN ATTEMPTED TO BRING THE MOTORCYCLE TO A SAFE STOP, DISCOVERED THE REAR BRAKE DID NOT WORK, WHICH FORCED TO USE THE FRONT BRAKES ONLY, WHICH EXTENDED HIS STOPPING DISTANCE. WAS ABLE TO BRING THE BIKE TO A SAFE STOP WITHOUT INCIDENT. UPON INSPECTION, REALIZED THE REAR BRAKES FAI…

Read full complaint

2000 K1200LT BMW MOTORCYCLE FINAL DRIVE FAILURE. WHEN ATTEMPTED TO BRING THE MOTORCYCLE TO A SAFE STOP, DISCOVERED THE REAR BRAKE DID NOT WORK, WHICH FORCED TO USE THE FRONT BRAKES ONLY, WHICH EXTENDED HIS STOPPING DISTANCE. WAS ABLE TO BRING THE BIKE TO A SAFE STOP WITHOUT INCIDENT. UPON INSPECTION, REALIZED THE REAR BRAKES FAILED BECAUSE THEY WERE SATURATED IN GEAR OIL, THAT LEAKED FROM THE FINAL DRIVE UNIT AFTER THE FINAL DRIVE BEARING SEAL FAILED. THE FINAL GEAR CROWN GEAR BEARING FAILED, ALLOWING THE OIL TO LEAK. THE CONSUMER STATED IT WAS THE THIRD TIME THE FINAL DRIVE BEARING FAILED ON HIS BIKE. *TR

NHTSA ODI #10449903

72,000 miles · Feb 29, 2012
Power Train

2000 K1200LT BMW MOTORCYCLE FINAL DRIVE FAILURE. WHEN ATTEMPTED TO BRING THE MOTORCYCLE TO A SAFE STOP, DISCOVERED THE REAR BRAKE DID NOT WORK, WHICH FORCED TO USE THE FRONT BRAKES ONLY, WHICH EXTENDED HIS STOPPING DISTANCE. WAS ABLE TO BRING THE BIKE TO A SAFE STOP WITHOUT INCIDENT. UPON INSPECTION, REALIZED THE REAR BRAKES FAI…

Read full complaint

2000 K1200LT BMW MOTORCYCLE FINAL DRIVE FAILURE. WHEN ATTEMPTED TO BRING THE MOTORCYCLE TO A SAFE STOP, DISCOVERED THE REAR BRAKE DID NOT WORK, WHICH FORCED TO USE THE FRONT BRAKES ONLY, WHICH EXTENDED HIS STOPPING DISTANCE. WAS ABLE TO BRING THE BIKE TO A SAFE STOP WITHOUT INCIDENT. UPON INSPECTION, REALIZED THE REAR BRAKES FAILED BECAUSE THEY WERE SATURATED IN GEAR OIL, THAT LEAKED FROM THE FINAL DRIVE UNIT AFTER THE FINAL DRIVE BEARING SEAL FAILED. THE FINAL GEAR CROWN GEAR BEARING FAILED, ALLOWING THE OIL TO LEAK. THE CONSUMER STATED IT WAS THE SECOND TIME THE FINAL DRIVE BEARING FAILED ON HIS BIKE.*TR

NHTSA ODI #10449902

36,000 miles · Feb 29, 2012
Power Train

2000 K1200LT BMW MOTORCYCLE FINAL DRIVE FAILURE. WHEN ATTEMPTED TO BRING THE MOTORCYCLE TO A SAFE STOP, DISCOVERED THE REAR BRAKE DID NOT WORK, WHICH FORCED TO USE THE FRONT BRAKES ONLY, WHICH EXTENDED HIS STOPPING DISTANCE. WAS ABLE TO BRING THE BIKE TO A SAFE STOP WITHOUT INCIDENT. UPON INSPECTION, REALIZED THE REAR BRAKES FA…

Read full complaint

2000 K1200LT BMW MOTORCYCLE FINAL DRIVE FAILURE. WHEN ATTEMPTED TO BRING THE MOTORCYCLE TO A SAFE STOP, DISCOVERED THE REAR BRAKE DID NOT WORK, WHICH FORCED TO USE THE FRONT BRAKES ONLY, WHICH EXTENDED HIS STOPPING DISTANCE. WAS ABLE TO BRING THE BIKE TO A SAFE STOP WITHOUT INCIDENT. UPON INSPECTION, REALIZED THE REAR BRAKES FAILED BECAUSE THEY WERE SATURATED IN GEAR OIL, THAT LEAKED FROM THE FINAL DRIVE UNIT AFTER THE FINAL DRIVE BEARING SEAL FAILED. THE FINAL GEAR CROWN GEAR BEARING FAILED, ALLOWING THE OIL TO LEAK. THE CONSUMER STATED IT WAS THE FIRST TIME THE FINAL DRIVE BEARING FAILED ON HIS BIKE. *TR

NHTSA ODI #10449901

38,696 miles · Feb 8, 2012
Power Train

REAR DRIVE FAILURE OCCURING ON INTERSTATE HIGHWAY. *TR

NHTSA ODI #10447190

64,500 miles · Aug 14, 2009
Power Train

FINAL DRIVE BEARING FAILURE. THIS INITIALLY CAUSED AN UNSTABLE SIDE TO SIDE MOTION OF THE VEHICLE. BEFORE BEING ABLE TO STOP THE VEHICLE THE REAR WHEEL INTERMITTENTLY LOCKED UP. THEN GEAR OIL LEAKED ONTO THE BRAKE PADS AND DISC RENDERING THEM INEFFECTIVE. THIS IS THE SECOND OCCURRENCE OF FINAL DRIVE BEARING FAILURE IN THIS V…

Read full complaint

FINAL DRIVE BEARING FAILURE. THIS INITIALLY CAUSED AN UNSTABLE SIDE TO SIDE MOTION OF THE VEHICLE. BEFORE BEING ABLE TO STOP THE VEHICLE THE REAR WHEEL INTERMITTENTLY LOCKED UP. THEN GEAR OIL LEAKED ONTO THE BRAKE PADS AND DISC RENDERING THEM INEFFECTIVE. THIS IS THE SECOND OCCURRENCE OF FINAL DRIVE BEARING FAILURE IN THIS VEHICLE. THE VEHICLE HAS BEEN MAINTAINED TO THE MANUFACTURERS SPECIFICATIONS. THIS BEARING HAD ONLY 26,000 MILES ON IT. *TR

NHTSA ODI #10280436

38,491 miles · Aug 14, 2009
Power Train

FINAL DRIVE BEARING FAILURE RESULTING IN GEAR OIL LEAKING ONTO BRAKE PADS AND DISC. THUS RENDERING THE REAR BRAKE INEFFECTIVE. *TR

NHTSA ODI #10280434

75,000 miles · Sep 3, 2008
Power Train

REAR DRIVE FAILURE. *TR

NHTSA ODI #10240795

13,500 miles · Sep 3, 2008
Power Train

FINAL DRIVE FAILURE RESULTING IN REAR WHEEL SEIZURE AND TOTAL LOSS OF POWER TO REAR WHEEL. *TR

NHTSA ODI #10240734

35,000 miles · Aug 2, 2006
Power Train

I PURCHASED MY K1200LT LAST MONDAY (24 JULY 2006) FROM A RESIDENT IN OHIO. DROVE THE BIKE HOME TO GEORGIA. I FELT A SLIGHT VIBRATION OVER THE LAST 100 MILES OR SO. I THOUGHT IT MIGHT BE THE ROAD. T HE NEXT DAY I TOOK THE BIKE OUT, VIBRATION AND A RUBBING SOUND WAS COMING FROM THE REAR END. WHEN I GOT THE BIKE HOME I NOTICE OIL L…

Read full complaint

I PURCHASED MY K1200LT LAST MONDAY (24 JULY 2006) FROM A RESIDENT IN OHIO. DROVE THE BIKE HOME TO GEORGIA. I FELT A SLIGHT VIBRATION OVER THE LAST 100 MILES OR SO. I THOUGHT IT MIGHT BE THE ROAD. T HE NEXT DAY I TOOK THE BIKE OUT, VIBRATION AND A RUBBING SOUND WAS COMING FROM THE REAR END. WHEN I GOT THE BIKE HOME I NOTICE OIL LEAKING FROM WHAT I THOUGHT WAS THE REAR BRAKE. TOOK BIKE TO BMW THEY SAID IT WAS FINAL DRIVE FAILURE. BIKE IS STILL IN THE SHOP. I ONLY OWNED THE BIKE FOR TWO DAYS AND ALREADY A MAJOR PROBLEM. *JB

NHTSA ODI #10164170

Official recalls

0

No recalls in this snapshot.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

2

DP12001 · M/c Final Drive Ball Bearing Failure

Opened Jan 20, 2012 · Closed Jun 20, 2013

Status: closed (inferred from source dates) · Power Train:driveline:differential Unit

The Office of Defects Investigation (ODI) received a defect petition requesting that it open an investigation into model year (MY) 1998-2009 BMW KLT series motorcycles for final drive bearing failures.The petitioner asked NHTSA to issue an order that [BMW] be required to recall the affected models for inspection ofcomponent wear and proper assembly of the [final drive] bearing.ODI has reviewed the petition, assessed relevant consumer complaints, and gathered other data in the course of investigating this issue.Based on its review, ODI does not believe that a safety-related defect trend currently exists for final drive bearing failures in the subject motorcycles.Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to accomplish the agency's safety mission, the petition is denied.However, the agency will continue to monitor information related to this issue and will take further action if warranted.For detailed information, see the Federal Register notice: https://federalregister.gov/a/2013-13779.

PE03054 · Fuel Line Leakage

Opened Dec 1, 2003 · Closed Jan 23, 2004

Status: closed (inferred from source dates) · Fuel System, Gasoline:delivery:hoses, Lines/piping, And Fittings

BMW IS CONDUCTING A RECALL (04V-028).AN INFORMATION REQUEST(IR)RESPONSE WAS NOT RECEIVED. UPON BMW'S RECEIPT OF THE IR, AND AFTER DISCUSSIONS WITH ODI, BMWDETERMINED THAT A RECALL WAS NECESSARY. ON CERTAIN MOTORCYCLES, THE O-RING CONTAINED WITHIN THE FUEL LINE QUICK-DISCONNECT COUPLING COULD BECOME DAMAGED.FURTHER, THERE IS ALSO A PROBLEM INVOLVING CRIMP-TYPE HOSE CLAMPS, WHICH CAN ALSO RESULT IN A SMALL FUEL LEAK.DEALERS WILL INSPECT, AND IF NECESSARY, ADJUST ALL CRIMP-TYPE HOSE CLAMPS.ALSO ALL FUEL LINE QUICK-DISCONNECT COUPLINGS WILL BE INSPECTED.IF A LEAK IS DETECTED, THE QUICK-DISCONNECT O-RING WILL BE REPLACED.IF DAMAGED, THE COUPLING WILL BE REPLACED.OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING FEBRUARY 2004.