IllustrationPARKING BRAKE FAULT LIGHT ON. STATES NO PARKING BRAKE AVAILABLE USING BUTTON WHEN STATIONARY. *JS
2003 BMW 745LI
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2003 BMW 745LI do not stand out strongly from the model-year median of 25.
About this comparison →How this year compares
Owner complaints by model year
Compare all 745LI years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
50–25K
325–50K
550–75K
575–100K
13100–150K
6150K+
37 reports with mileage · 13 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 11 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 7 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports0 fire reports1 injury reports
What owners actually said
50 reportsMY VEHICLE IS A 2003 BMW 745LI THAT HAS AN DRIVE SYSTEM AND THE LATEST WARNING NOTE CAME UP ON THE IDRIVE SCREEN THAT SAYS, "FAULT IN PASS.-RESTRAINT SYSTEM AFFECTING AIRBAG, BELT TENSIONER OR BELT-FORCE LIMITER. FASTEN AND CONTINUE TO WEAR BELTS. PLEASE CONTACT THE NEAREST BMW CENTER". *TR
I PURCHASED A 2003 745LI NOVEMBER 2007 WHEN COMING TO A STOP THERE IS A CLUNKING NOISE WITH HARSH DOWNSHIFT. TOOK CAR DEALERSHIP ON SEVERAL OCCASIONS WITH CONCERN AND AFTER SEVERAL FAILED ATTEMPTS TO REMEDY THE ISSUE WAS FINALLY MADE AWARE THAT THERE WAS SERVICE BULLETIN CONCERNING TRANSMISSION ISSUE. DEALER STATED THAT IT WA…
Read full complaint
I PURCHASED A 2003 745LI NOVEMBER 2007 WHEN COMING TO A STOP THERE IS A CLUNKING NOISE WITH HARSH DOWNSHIFT. TOOK CAR DEALERSHIP ON SEVERAL OCCASIONS WITH CONCERN AND AFTER SEVERAL FAILED ATTEMPTS TO REMEDY THE ISSUE WAS FINALLY MADE AWARE THAT THERE WAS SERVICE BULLETIN CONCERNING TRANSMISSION ISSUE. DEALER STATED THAT IT WAS POSSIBLY FROM TRANSMISSION AND ADVISED ME TO COME BACK FOR REPAIRS. IN NOVEMBER 2008 WAS THE FIRST TIME THAT I HAD TO GET THE TRANSMISSION REPLACED BECAUSE OF THE CLUNKING WITH HARSH DOWNSHIFT. THIS ISSUE RETURNED AND PROGRESSED AND THE TRANSMISSION WAS REPLACED FOR THE SECOND TIME DUE TO SAME ISSUE 08-2009. AFTER SECOND TRANSMISSION INSTALLED ISSUE STILL EXISTED AND WAS ADVISED THAT THERE WAS A SOFTWARE ISSUE WITH TRANSMISSION AND THAT THERE WAS NOT ANY OTHER UPDATES AT THIS TIME AND THE INFORMATION WOULD BE FORWARDED FOR BMW FOR ANALYSIS. THE UNIVERSAL /GUIBO HAS BEEN REPLACED 3-4 TIMES SINCE I'VE HAD THE CAR BECAUSE OF CLUNKING NOISE HARSH DOWNSHIFTING. AS TIME WENT ON AROUND MAY 2011 THERE WAS AN INCIDENT WHERE AS I WAS DRIVING, APPROACHING AND COMING TO A STOP AT A STOP SIGN, IN ADDITION TO THE HARSH CLUNKING THE CAR JERKED AND ACCELERATED FORWARD ALMOST INTO ONGOING TRAFFIC. TOOK IT BACK TO THE DEALERSHIP, THEY MENTIONED THE SERVICE BULLETIN AGAIN CONCERNING THE ISSUE STATED THAT THE TRANSMISSION MIGHT NEED TO BE REPLACED. THEY FIRST REPLACED THE UNIVERSAL/GUIBO, WHICH I HAD TO PAY OUT OF POCKET AND THE ISSUE STILL EXISTS. THE INCIDENT THAT HAPPENED IN MAY 2011 HAPPENED AGAIN FOR THE SECOND TIME IN NOV. 2011. I BELIEVE THAT THERE ARE SOME MAJOR ISSUES WITH TRANSMISSION AND ELECTRICAL SYSTEM. SINCE THEN I'VE BEEN HAVING, BRAKE/DRIVE MALFUNCTION AMONG OTHER ISSUES. I CONSIDER THIS TO BE SAFETY CONCERN. THIS ISSUE SHOULD BE THOROUGHLY INVESTIGATED. *TR
11/09 DRIVERSIDE WINDOW REGULATOR REPLACED;CONSTANTLY REPLACING DRIVER SIDE TURN SIGNAL BULB; IN APPROX. MARCH 2010 CAR WOULD RANDOMLY NOT GO INTO REVERSE AND WHEN I WAS ABLE TO GET IT INTO DRIVE CAR WOULD FEEL SLUGGISH OR WHEN COMING TO A STOP FELT AS IF I WAS HIT FROM BEHIND OR CAR WOULD GO INTO FAILSAFE MODE AND I WOULD BE UN…
Read full complaint
11/09 DRIVERSIDE WINDOW REGULATOR REPLACED;CONSTANTLY REPLACING DRIVER SIDE TURN SIGNAL BULB; IN APPROX. MARCH 2010 CAR WOULD RANDOMLY NOT GO INTO REVERSE AND WHEN I WAS ABLE TO GET IT INTO DRIVE CAR WOULD FEEL SLUGGISH OR WHEN COMING TO A STOP FELT AS IF I WAS HIT FROM BEHIND OR CAR WOULD GO INTO FAILSAFE MODE AND I WOULD BE UNABLE TO ACCELERATE, HAD DIAGNOSED BY BMW WAS TOLD 10K+ TO HAVE TRANNY REPLACED ; FOUND A REBUILT TRANNY AND REPLACED IN APPROX. MAY 2010; HERE WE ARE IN AUGUST 2011 AND CAR AGAIN BEGAN TO NOT GO INTO REVERSE AND GIVE A FAILSAFE NOTIFICATION; ATTEMPTED TO START CAR TODAY 8/8 TO TAKE TO SHOP; HOWEVER CAR WOULD NOT GO INTO REVERSE AND WHEN IT FINALLY INDICATED IT WAS IN REVERSE; ACTUALLY WENT FORWARD BEGAN TO MAKE A WEIRD GRINDING NOISE SO I TURNED IT OFF AND THERE IT SITS IN MY DRIVEWAY LEAKING WHAT I PRESUME TO BE TRANSMISSION FLUID UNABLE TO BE DRIVEN. CURRENT MILEAGE 133K
03 745LI IN FOR SERVICE REGARDING "SERVICE ENGINE" ; WHEN CAR WAS READY WE PICKED IT UP AND THE PARK BRAKE LIGHT WAS ILLUMINATED. THEY RESET IT AND I LEFT. 2 HRS LATER LIGHT RETURNED. NOW THEY SAY PARKING BRAKE/ACTUATOR NEEDS TO BE REPLACED OVER $1000.00. *TR
THERE IS A TUBE IN ENGINE THAT IS SECURED WITH TWO O RINGS. THE TUBE HOLDS COOLANT. IF THE O RINGS FAIL, THEN THE COOLANT LEAKS AND THE ENGINE WILL OVERHEAT. THERE ARE MULTIPLE CASES OF THIS DOCUMENTED ON THE INTERNET AND IT HAS OCCURRED IN MY VEHICLE. SERVICE REPRESENTATIVES HAVE INDICATED THAT THIS IS A COMMON PROBLEM THAT…
Read full complaint
THERE IS A TUBE IN ENGINE THAT IS SECURED WITH TWO O RINGS. THE TUBE HOLDS COOLANT. IF THE O RINGS FAIL, THEN THE COOLANT LEAKS AND THE ENGINE WILL OVERHEAT. THERE ARE MULTIPLE CASES OF THIS DOCUMENTED ON THE INTERNET AND IT HAS OCCURRED IN MY VEHICLE. SERVICE REPRESENTATIVES HAVE INDICATED THAT THIS IS A COMMON PROBLEM THAT THEY SEE ON 745'S ENGINES MADE BEFORE 2006. *TR
TL*THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT STATED THE AIR BAG LIGHT HAD BEEN ILLUMINATING ON THE INSTRUMENT PANEL FOR A FEW MONTHS. THE VEHICLE WAS INSPECTED BY AN AUTHORIZED DEALER AND THE CONTACT WAS ADVISED THAT THE FRONT PASSENGER SEAT SENSOR NEEDED TO BE REPLACED. THE DEALER ALSO INFORMED THE CONTACT THEY WERE NOT S…
Read full complaint
TL*THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT STATED THE AIR BAG LIGHT HAD BEEN ILLUMINATING ON THE INSTRUMENT PANEL FOR A FEW MONTHS. THE VEHICLE WAS INSPECTED BY AN AUTHORIZED DEALER AND THE CONTACT WAS ADVISED THAT THE FRONT PASSENGER SEAT SENSOR NEEDED TO BE REPLACED. THE DEALER ALSO INFORMED THE CONTACT THEY WERE NOT SURE THE AIR BAGS WOULD DEPLOY IN THE EVENT OF A CRASH. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE AND CURRENT MILEAGES WERE 117,000.
TL* THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT STATED THE VEHICLE WAS EXPERIENCING RECURRING FAILURES IN WHICH THE DASHBOARD WOULD DISPLAY AN ENGINE MALFUNCTION MESSAGE BEFORE STALLING. THE FAILURES OCCURRED AFTER THE VEHICLE WAS IN OPERATION FOR APPROXIMATELY 20 MINUTES WHILE DRIVING AT ANY SPEED. AFTER THE FAILURE, THE VEH…
Read full complaint
TL* THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT STATED THE VEHICLE WAS EXPERIENCING RECURRING FAILURES IN WHICH THE DASHBOARD WOULD DISPLAY AN ENGINE MALFUNCTION MESSAGE BEFORE STALLING. THE FAILURES OCCURRED AFTER THE VEHICLE WAS IN OPERATION FOR APPROXIMATELY 20 MINUTES WHILE DRIVING AT ANY SPEED. AFTER THE FAILURE, THE VEHICLE WOULD BE PULLED OVER AND RESTARTED. AFTER SOME OF THE FAILURES THE VEHICLE WOULD NOT IMMEDIATELY RESTART. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER WHERE THE CONTACT WAS TOLD THE VEHICLE WAS NOT INCLUDED IN THE RECALL ASSOCIATED WITH NHTSA CAMPAIGN ID NUMBER: 03V240000 (ENGINE AND ENGINE COOLING). THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 100,000 AND THE CURRENT MILEAGE WAS 120,580.
TL*THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT RECEIVED RECALL NOTICE NHTSA CAMPAIGN ID NUMBER: 10V446000 (SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM). THE VEHICLE WAS TAKEN TO THE DEALER WHO STATED THAT THE NECK WAS SEPARATING FROM THE VACUUM PUMP WHICH CAUSED A LEAK. THE ADDITIONAL REPAIRS WERE NOT INCLUDED IN THE RECALL…
Read full complaint
TL*THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT RECEIVED RECALL NOTICE NHTSA CAMPAIGN ID NUMBER: 10V446000 (SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM). THE VEHICLE WAS TAKEN TO THE DEALER WHO STATED THAT THE NECK WAS SEPARATING FROM THE VACUUM PUMP WHICH CAUSED A LEAK. THE ADDITIONAL REPAIRS WERE NOT INCLUDED IN THE RECALL AND THE WOULD BE RESPONSIBLE FOR THE COSTS. THE REPAIRS UNDER THE RECALL WERE MADE BUT NONE OF THE ADDITIONAL REPAIRS WERE MADE. THE VIN WAS UNAVAILABLE. THE APPROXIMATE FAILURE MILEAGE WAS 104,000.
TL*THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT STATED THAT HE RECEIVED A RECALL NOTICE, NOT LISTED ON THE NHTSA SITE, IN REFERENCE TO THE PIPING AND BRAKE MASTER CYLINDER. THE RECALL NOTICE STATED THAT THE DEALER WAS TO REPLACE THE BRAKE VACUUM PUMP BUT THEY DID NOT. THE VEHICLE WAS REPAIRED AND ALL OTHER COMPONENTS EXCEPT FO…
Read full complaint
TL*THE CONTACT OWNS A 2003 BMW 745LI. THE CONTACT STATED THAT HE RECEIVED A RECALL NOTICE, NOT LISTED ON THE NHTSA SITE, IN REFERENCE TO THE PIPING AND BRAKE MASTER CYLINDER. THE RECALL NOTICE STATED THAT THE DEALER WAS TO REPLACE THE BRAKE VACUUM PUMP BUT THEY DID NOT. THE VEHICLE WAS REPAIRED AND ALL OTHER COMPONENTS EXCEPT FOR THE BRAKE VACUUM PUMP WERE REPLACED. THE FAILURE MILEAGE WAS APPROXIMATELY 68,800.
Official recalls
203V324000 · Engine And Engine Cooling
Aug 26, 2003
ON CERTAIN PASSENGER VEHICLES, THE ENGINE OIL FILTER DRAIN PLUG MAY BE INSUFFICIENTLY TIGHTENED. THIS COULD LEAD TO LOOSENING OF THE PLUG CAUSING AN INITIAL OIL SPRAY AND A SUBSEQUENT OIL LEAK.
Consequence & remedy
Consequence: IF A LARGE AMOUNT OF OIL LOSS OCCURS, ENGINE DAMAGE MAY RESULT. DEPENDING ON THE EXTENT OF THE DAMAGE, A CRASH COULD OCCUR.
Remedy: DEALERS WILL INSPECT THE TORQUE OF THE OIL FILTER DRAIN PLUG AND, IF NECESSARY, RETIGHTEN THE DRAIN PLUG WITH THE CORRECTLY SPECIFIED TORQUE. OWNER NOTIFICATION BEGAN ON SEPTEMBER 12, 2003. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
03V240000 · Engine And Engine Cooling
Jul 1, 2003
ON CERTAIN PASSENGER VEHICLES, DUE TO A SOFTWARE ERROR, A DESYNCHRONIZATION OF THE VALVETRONIC MOTORS FOR ENGINE BANKS I AND II MAY OCCUR. IF THIS OCCURS, THE ENGINE COULD STALL.
Consequence & remedy
Consequence: IN THOSE CASES, THE DRIVER MAY NOT BE ABLE TO RESTART THE ENGINE. DEPENDING ON THE LEVEL OF ENGINE ROUGHNESS, OR STALLING, AS WELL AS TRAFFIC CONDITIONS AND THE DRIVER'S REACTIONS, THIS COULD LEAD TO A CRASH.
Remedy: DEALERS WILL REPROGRAM THE DIGITAL ENGINE MANAGEMENT CONTROL UNIT. OWNER NOTIFICATION BEGAN JULY 8, 2003. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA12002 · Vehicle Rollaway
Opened Apr 10, 2012 · Closed Jan 24, 2013
Status: closed (inferred from source dates) · Electrical System; Electrical System:ignition; Electrical System:ignition:switch; Power Train:automatic Transmission
In a letter dated October 16, 2012, BMW of North America, LLC (BMW) submitted a Defect Information Report (DIR), NHTSA Recall No. 12V-502 to NHTSA identifying a safety defect involving the possibility of unattended vehicle rollaway in MY 2005 through 2008 BMW 7-Series (approximately 45,000) vehicles equipped with the Comfort Access Option.The Comfort Access option allows the driver to start and stop the engine (by pressing the engine start / stop button) without inserting the key fob into the vehicles key slot in the instrument panel.Subject vehicles not equipped with the Comfort Access option require the key fob be inserted the key slot to start the engine.Upon removal of the key from the key slot the vehicle will automatically shift to Park if the driver has not done so using the gearshift lever.Sunject vehicles equipped with the Comfort Access option are designed such that when the vehicle is stopped with the service brakes applied and the transmission in Drive or Reverse, the driver can push the engine start/stop button one time, stopping the engine and automatically shifting the transmission to Park.In its DIR, BMW identified a condition such that if the driver depressed the start-stop button multiple times in rapid succession, the transmission could shift to Neutral instead of Park.With the transmission in neutral, depending on the slope of the road, the vehicle could rollaway if unattended.In review of data submitted to the Office of Defects Investigation (ODI) and of reports submitted to BMW, ODI identified 20 reports alleging vehicle rollaway involving vehicles equipped with Comfort Access.The vehicles identified in these reports are all subject to recall 12V-502.Ten of these reports were identified as likely related to the defect described in recall 12V-502.Two of the reports are likely related to other mechanical failures.The remaining 8 allegations of vehicle rollaway could not be associated with a specific cause.There are 32 reports alleging vehicle rollaway in the subject vehicles not equipped with the Comfort Access option.A vehicle based safety defect trend was not identified in these reports.Subject vehicles not equipped the Comfort Access option will automatically shift to Park once the key fob is removed from the key slot.In this regard these vehicles behave similarly to those with traditional mechanical keys where the key cannot be removed from the ignition unless the vehicle is shifted to Park.The difference between these vehicles and the subject vehicles with the Comfort Access option is that in the Comfort Access equipped vehicles, the engine can be started and stopped without the key fob in the key slot.ODI reports 10429922 and 10419177 noted in the EA opening resume were determined to be vehicles not equipped with the Comfort Access option and ODI did not identify a vehicle based safety defect associated with these incidents.This investigation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10185770
Additional source detail variants (4)
Electrical System
In a letter dated October 16, 2012, BMW of North America, LLC (BMW) submitted a Defect Information Report (DIR), NHTSA Recall No. 12V-502 to NHTSA identifying a safety defect involving the possibility of unattended vehicle rollaway in MY 2005 through 2008 BMW 7-Series (approximately 45,000) vehicles equipped with the Comfort Access Option.The Comfort Access option allows the driver to start and stop the engine (by pressing the engine start / stop button) without inserting the key fob into the vehicles key slot in the instrument panel.Subject vehicles not equipped with the Comfort Access option require the key fob be inserted the key slot to start the engine.Upon removal of the key from the key slot the vehicle will automatically shift to Park if the driver has not done so using the gearshift lever.Sunject vehicles equipped with the Comfort Access option are designed such that when the vehicle is stopped with the service brakes applied and the transmission in Drive or Reverse, the driver can push the engine start/stop button one time, stopping the engine and automatically shifting the transmission to Park.In its DIR, BMW identified a condition such that if the driver depressed the start-stop button multiple times in rapid succession, the transmission could shift to Neutral instead of Park.With the transmission in neutral, depending on the slope of the road, the vehicle could rollaway if unattended.In review of data submitted to the Office of Defects Investigation (ODI) and of reports submitted to BMW, ODI identified 20 reports alleging vehicle rollaway involving vehicles equipped with Comfort Access.The vehicles identified in these reports are all subject to recall 12V-502.Ten of these reports were identified as likely related to the defect described in recall 12V-502.Two of the reports are likely related to other mechanical failures.The remaining 8 allegations of vehicle rollaway could not be associated with a specific cause.There are 32 reports alleging vehicle rollaway in the subject vehicles not equipped with the Comfort Access option.A vehicle based safety defect trend was not identified in these reports.Subject vehicles not equipped the Comfort Access option will automatically shift to Park once the key fob is removed from the key slot.In this regard these vehicles behave similarly to those with traditional mechanical keys where the key cannot be removed from the ignition unless the vehicle is shifted to Park.The difference between these vehicles and the subject vehicles with the Comfort Access option is that in the Comfort Access equipped vehicles, the engine can be started and stopped without the key fob in the key slot.ODI reports 10429922 and 10419177 noted in the EA opening resume were determined to be vehicles not equipped with the Comfort Access option and ODI did not identify a vehicle based safety defect associated with these incidents.This investigation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10185770
Electrical System:ignition
In a letter dated October 16, 2012, BMW of North America, LLC (BMW) submitted a Defect Information Report (DIR), NHTSA Recall No. 12V-502 to NHTSA identifying a safety defect involving the possibility of unattended vehicle rollaway in MY 2005 through 2008 BMW 7-Series (approximately 45,000) vehicles equipped with the Comfort Access Option.The Comfort Access option allows the driver to start and stop the engine (by pressing the engine start / stop button) without inserting the key fob into the vehicles key slot in the instrument panel.Subject vehicles not equipped with the Comfort Access option require the key fob be inserted the key slot to start the engine.Upon removal of the key from the key slot the vehicle will automatically shift to Park if the driver has not done so using the gearshift lever.Sunject vehicles equipped with the Comfort Access option are designed such that when the vehicle is stopped with the service brakes applied and the transmission in Drive or Reverse, the driver can push the engine start/stop button one time, stopping the engine and automatically shifting the transmission to Park.In its DIR, BMW identified a condition such that if the driver depressed the start-stop button multiple times in rapid succession, the transmission could shift to Neutral instead of Park.With the transmission in neutral, depending on the slope of the road, the vehicle could rollaway if unattended.In review of data submitted to the Office of Defects Investigation (ODI) and of reports submitted to BMW, ODI identified 20 reports alleging vehicle rollaway involving vehicles equipped with Comfort Access.The vehicles identified in these reports are all subject to recall 12V-502.Ten of these reports were identified as likely related to the defect described in recall 12V-502.Two of the reports are likely related to other mechanical failures.The remaining 8 allegations of vehicle rollaway could not be associated with a specific cause.There are 32 reports alleging vehicle rollaway in the subject vehicles not equipped with the Comfort Access option.A vehicle based safety defect trend was not identified in these reports.Subject vehicles not equipped the Comfort Access option will automatically shift to Park once the key fob is removed from the key slot.In this regard these vehicles behave similarly to those with traditional mechanical keys where the key cannot be removed from the ignition unless the vehicle is shifted to Park.The difference between these vehicles and the subject vehicles with the Comfort Access option is that in the Comfort Access equipped vehicles, the engine can be started and stopped without the key fob in the key slot.ODI reports 10429922 and 10419177 noted in the EA opening resume were determined to be vehicles not equipped with the Comfort Access option and ODI did not identify a vehicle based safety defect associated with these incidents.This investigation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10185770
Electrical System:ignition:switch
In a letter dated October 16, 2012, BMW of North America, LLC (BMW) submitted a Defect Information Report (DIR), NHTSA Recall No. 12V-502 to NHTSA identifying a safety defect involving the possibility of unattended vehicle rollaway in MY 2005 through 2008 BMW 7-Series (approximately 45,000) vehicles equipped with the Comfort Access Option.The Comfort Access option allows the driver to start and stop the engine (by pressing the engine start / stop button) without inserting the key fob into the vehicles key slot in the instrument panel.Subject vehicles not equipped with the Comfort Access option require the key fob be inserted the key slot to start the engine.Upon removal of the key from the key slot the vehicle will automatically shift to Park if the driver has not done so using the gearshift lever.Sunject vehicles equipped with the Comfort Access option are designed such that when the vehicle is stopped with the service brakes applied and the transmission in Drive or Reverse, the driver can push the engine start/stop button one time, stopping the engine and automatically shifting the transmission to Park.In its DIR, BMW identified a condition such that if the driver depressed the start-stop button multiple times in rapid succession, the transmission could shift to Neutral instead of Park.With the transmission in neutral, depending on the slope of the road, the vehicle could rollaway if unattended.In review of data submitted to the Office of Defects Investigation (ODI) and of reports submitted to BMW, ODI identified 20 reports alleging vehicle rollaway involving vehicles equipped with Comfort Access.The vehicles identified in these reports are all subject to recall 12V-502.Ten of these reports were identified as likely related to the defect described in recall 12V-502.Two of the reports are likely related to other mechanical failures.The remaining 8 allegations of vehicle rollaway could not be associated with a specific cause.There are 32 reports alleging vehicle rollaway in the subject vehicles not equipped with the Comfort Access option.A vehicle based safety defect trend was not identified in these reports.Subject vehicles not equipped the Comfort Access option will automatically shift to Park once the key fob is removed from the key slot.In this regard these vehicles behave similarly to those with traditional mechanical keys where the key cannot be removed from the ignition unless the vehicle is shifted to Park.The difference between these vehicles and the subject vehicles with the Comfort Access option is that in the Comfort Access equipped vehicles, the engine can be started and stopped without the key fob in the key slot.ODI reports 10429922 and 10419177 noted in the EA opening resume were determined to be vehicles not equipped with the Comfort Access option and ODI did not identify a vehicle based safety defect associated with these incidents.This investigation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10185770
Power Train:automatic Transmission
In a letter dated October 16, 2012, BMW of North America, LLC (BMW) submitted a Defect Information Report (DIR), NHTSA Recall No. 12V-502 to NHTSA identifying a safety defect involving the possibility of unattended vehicle rollaway in MY 2005 through 2008 BMW 7-Series (approximately 45,000) vehicles equipped with the Comfort Access Option.The Comfort Access option allows the driver to start and stop the engine (by pressing the engine start / stop button) without inserting the key fob into the vehicles key slot in the instrument panel.Subject vehicles not equipped with the Comfort Access option require the key fob be inserted the key slot to start the engine.Upon removal of the key from the key slot the vehicle will automatically shift to Park if the driver has not done so using the gearshift lever.Sunject vehicles equipped with the Comfort Access option are designed such that when the vehicle is stopped with the service brakes applied and the transmission in Drive or Reverse, the driver can push the engine start/stop button one time, stopping the engine and automatically shifting the transmission to Park.In its DIR, BMW identified a condition such that if the driver depressed the start-stop button multiple times in rapid succession, the transmission could shift to Neutral instead of Park.With the transmission in neutral, depending on the slope of the road, the vehicle could rollaway if unattended.In review of data submitted to the Office of Defects Investigation (ODI) and of reports submitted to BMW, ODI identified 20 reports alleging vehicle rollaway involving vehicles equipped with Comfort Access.The vehicles identified in these reports are all subject to recall 12V-502.Ten of these reports were identified as likely related to the defect described in recall 12V-502.Two of the reports are likely related to other mechanical failures.The remaining 8 allegations of vehicle rollaway could not be associated with a specific cause.There are 32 reports alleging vehicle rollaway in the subject vehicles not equipped with the Comfort Access option.A vehicle based safety defect trend was not identified in these reports.Subject vehicles not equipped the Comfort Access option will automatically shift to Park once the key fob is removed from the key slot.In this regard these vehicles behave similarly to those with traditional mechanical keys where the key cannot be removed from the ignition unless the vehicle is shifted to Park.The difference between these vehicles and the subject vehicles with the Comfort Access option is that in the Comfort Access equipped vehicles, the engine can be started and stopped without the key fob in the key slot.ODI reports 10429922 and 10419177 noted in the EA opening resume were determined to be vehicles not equipped with the Comfort Access option and ODI did not identify a vehicle based safety defect associated with these incidents.This investigation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10185770
PE11025 · Vehicle Rollaway
Opened Aug 5, 2011 · Closed Apr 23, 2012
Status: closed (inferred from source dates) · Electrical System; Power Train:automatic Transmission
In response to the Office of Defects Investigation's (ODI) Information Request (IR) for PE11-025, BMW provided ODI with 1 complaint and 46 field reports relating to either incidents of unattended vehicle rollaway or vehicle movement after the driver expected the vehicle gearshift to automatically shift to park. ODI's analysis of the data provided by BMW identified 14 crashes and 5 alleged injuries. ODI has also identified 3 additional reports in its database alleging vehicle rollaway incidents of which 2 resulted in crashes.The subject vehicles are all equipped with push-buttons (Start/Stop button) to control starting/stopping the engine and Shift-by-Wire gearshift systems controlled by a column mounted selector lever behind the steering wheel. The Start/Stop button also controls switching the ignition and the radio ready state On and Off. Shift-by-wire systems replace the traditional mechanical connection (e.g., cable or linkage) between the gearshift and automatic transmission with an electronic connection controlled by a computer module. When parking the vehicle, the driver has the capability to manually shift the vehicle to park by pressing the Park button on the end of the electronic gearshift lever. However, the instructions for engine shutoff provided in the owner's manual state that pressing the Start/Stop button serves the dual function of switching off the engine and automatically shifting the transmission to Park.In response to ODI's information request for PE11-025, BMW described several circumstances where the subject vehicles may shift to neutral when the driver may expect it to automatically shift to park. First, for Comfort Access System (CAS) vehicles, if the transmission is in neutral when the key fob is in the ignition slot and the Start/Stop button is pressed to shut-off the engine, the transmission will remain in neutral. This is referred to as the Carwash mode and is a normal operating feature of the vehicles that is described in the owner's manual. BMW also described two circumstances that are not normal operating features and are not described in the owners' manual: (1) with the transmission in drive or reverse and the engine running, if the Start/Stop button is pushed 2 or 3 times within a 0.3 second to 0.5 second interval, the engine will stop and the transmission will shift to Neutral; and 2) if the Park button on the gearshift lever is pressed at the same time that the gearshift lever is actuated (i.e., toggled up or down) to select drive, reverse or neutral; the transmission will shift to neutral or remain in neutral.Beginning in model year (MY) 2005, BMW introduced CAS as an optional feature package for the subject vehicles.The key for CAS equipped vehicles is an electronic code that is sent to the engine control module by a remote transmitter (key fob). An optional docking port (key slot) is provided for driver convenience or to put the vehicle into Car Wash mode, which allows for engine shutoff in neutral. BMW sold approximately 45,000 subject vehicles with CAS and approximately 94 percent of the CAS equipped vehicles were produced from MY 2006 through 2008. Non-CAS subject vehicles were produced from MY 2002 through 2008 and require the remote control to be in the ignition slot located next to the Start/Stop button to start the engine.The 50 incidents identified by ODI's analysis of complaints and field reports include 18 involving CAS vehicles (39.6 incidents per 100,000 vehicles) and 32 involving non-CAS vehicles (42.0 incidents per 100,000 vehicles). Because the incidents are considered random events, the failure rates were also adjusted for vehicle exposure, resulting in rat
Additional source detail variants (2)
Electrical System
In response to the Office of Defects Investigation's (ODI) Information Request (IR) for PE11-025, BMW provided ODI with 1 complaint and 46 field reports relating to either incidents of unattended vehicle rollaway or vehicle movement after the driver expected the vehicle gearshift to automatically shift to park. ODI's analysis of the data provided by BMW identified 14 crashes and 5 alleged injuries. ODI has also identified 3 additional reports in its database alleging vehicle rollaway incidents of which 2 resulted in crashes.The subject vehicles are all equipped with push-buttons (Start/Stop button) to control starting/stopping the engine and Shift-by-Wire gearshift systems controlled by a column mounted selector lever behind the steering wheel. The Start/Stop button also controls switching the ignition and the radio ready state On and Off. Shift-by-wire systems replace the traditional mechanical connection (e.g., cable or linkage) between the gearshift and automatic transmission with an electronic connection controlled by a computer module. When parking the vehicle, the driver has the capability to manually shift the vehicle to park by pressing the Park button on the end of the electronic gearshift lever. However, the instructions for engine shutoff provided in the owner's manual state that pressing the Start/Stop button serves the dual function of switching off the engine and automatically shifting the transmission to Park.In response to ODI's information request for PE11-025, BMW described several circumstances where the subject vehicles may shift to neutral when the driver may expect it to automatically shift to park. First, for Comfort Access System (CAS) vehicles, if the transmission is in neutral when the key fob is in the ignition slot and the Start/Stop button is pressed to shut-off the engine, the transmission will remain in neutral. This is referred to as the Carwash mode and is a normal operating feature of the vehicles that is described in the owner's manual. BMW also described two circumstances that are not normal operating features and are not described in the owners' manual: (1) with the transmission in drive or reverse and the engine running, if the Start/Stop button is pushed 2 or 3 times within a 0.3 second to 0.5 second interval, the engine will stop and the transmission will shift to Neutral; and 2) if the Park button on the gearshift lever is pressed at the same time that the gearshift lever is actuated (i.e., toggled up or down) to select drive, reverse or neutral; the transmission will shift to neutral or remain in neutral.Beginning in model year (MY) 2005, BMW introduced CAS as an optional feature package for the subject vehicles.The key for CAS equipped vehicles is an electronic code that is sent to the engine control module by a remote transmitter (key fob). An optional docking port (key slot) is provided for driver convenience or to put the vehicle into Car Wash mode, which allows for engine shutoff in neutral. BMW sold approximately 45,000 subject vehicles with CAS and approximately 94 percent of the CAS equipped vehicles were produced from MY 2006 through 2008. Non-CAS subject vehicles were produced from MY 2002 through 2008 and require the remote control to be in the ignition slot located next to the Start/Stop button to start the engine.The 50 incidents identified by ODI's analysis of complaints and field reports include 18 involving CAS vehicles (39.6 incidents per 100,000 vehicles) and 32 involving non-CAS vehicles (42.0 incidents per 100,000 vehicles). Because the incidents are considered random events, the failure rates were also adjusted for vehicle exposure, resulting in rat
Power Train:automatic Transmission
In response to the Office of Defects Investigation's (ODI) Information Request (IR) for PE11-025, BMW provided ODI with 1 complaint and 46 field reports relating to either incidents of unattended vehicle rollaway or vehicle movement after the driver expected the vehicle gearshift to automatically shift to park. ODI's analysis of the data provided by BMW identified 14 crashes and 5 alleged injuries. ODI has also identified 3 additional reports in its database alleging vehicle rollaway incidents of which 2 resulted in crashes.The subject vehicles are all equipped with push-buttons (Start/Stop button) to control starting/stopping the engine and Shift-by-Wire gearshift systems controlled by a column mounted selector lever behind the steering wheel. The Start/Stop button also controls switching the ignition and the radio ready state On and Off. Shift-by-wire systems replace the traditional mechanical connection (e.g., cable or linkage) between the gearshift and automatic transmission with an electronic connection controlled by a computer module. When parking the vehicle, the driver has the capability to manually shift the vehicle to park by pressing the Park button on the end of the electronic gearshift lever. However, the instructions for engine shutoff provided in the owner's manual state that pressing the Start/Stop button serves the dual function of switching off the engine and automatically shifting the transmission to Park.In response to ODI's information request for PE11-025, BMW described several circumstances where the subject vehicles may shift to neutral when the driver may expect it to automatically shift to park. First, for Comfort Access System (CAS) vehicles, if the transmission is in neutral when the key fob is in the ignition slot and the Start/Stop button is pressed to shut-off the engine, the transmission will remain in neutral. This is referred to as the Carwash mode and is a normal operating feature of the vehicles that is described in the owner's manual. BMW also described two circumstances that are not normal operating features and are not described in the owners' manual: (1) with the transmission in drive or reverse and the engine running, if the Start/Stop button is pushed 2 or 3 times within a 0.3 second to 0.5 second interval, the engine will stop and the transmission will shift to Neutral; and 2) if the Park button on the gearshift lever is pressed at the same time that the gearshift lever is actuated (i.e., toggled up or down) to select drive, reverse or neutral; the transmission will shift to neutral or remain in neutral.Beginning in model year (MY) 2005, BMW introduced CAS as an optional feature package for the subject vehicles.The key for CAS equipped vehicles is an electronic code that is sent to the engine control module by a remote transmitter (key fob). An optional docking port (key slot) is provided for driver convenience or to put the vehicle into Car Wash mode, which allows for engine shutoff in neutral. BMW sold approximately 45,000 subject vehicles with CAS and approximately 94 percent of the CAS equipped vehicles were produced from MY 2006 through 2008. Non-CAS subject vehicles were produced from MY 2002 through 2008 and require the remote control to be in the ignition slot located next to the Start/Stop button to start the engine.The 50 incidents identified by ODI's analysis of complaints and field reports include 18 involving CAS vehicles (39.6 incidents per 100,000 vehicles) and 32 involving non-CAS vehicles (42.0 incidents per 100,000 vehicles). Because the incidents are considered random events, the failure rates were also adjusted for vehicle exposure, resulting in rat