Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 4 of 20 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
Air Bags. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Electrical System. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Seats. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
20 reports
Mileage unknown · Feb 21, 2023
Steering
The steering wheel will not go to its set position. BMW Dealer Service ran tests and found that the steering column hall effect sensor is faulty and is integral to the steering column. They have mentioned that the steering wheel adjustment will stop functioning in the future. If the steering wheel column cant be adjusted, it see…
Read full complaint
The steering wheel will not go to its set position. BMW Dealer Service ran tests and found that the steering column hall effect sensor is faulty and is integral to the steering column. They have mentioned that the steering wheel adjustment will stop functioning in the future. If the steering wheel column cant be adjusted, it seems to create risky driving conditions for the driver. The dealer has reproduced and confirmed the issue. There were no other symptoms or warning messages.
NHTSA ODI #11508276
Mileage unknown · Jan 12, 2023
Air BagsSeats
Passenger Restraint System error in BMW seems to be a common problem. This should be looked over for a recall issue.
NHTSA ODI #11501487
Mileage unknown · Oct 2, 2022
Air BagsSeat Belts
The passanger seat on this car’s seatbelt and airbags have malfioned numerous times. 3/2021 seat belt warning, seat matpad replaced 9/2022 air bag malfunction while driving with a passenger on highway. Once again seat matpad replaced. Car no longer in warranty $2500. It is extremely dangerous that this passanger seat keeps …
Read full complaint
The passanger seat on this car’s seatbelt and airbags have malfioned numerous times. 3/2021 seat belt warning, seat matpad replaced 9/2022 air bag malfunction while driving with a passenger on highway. Once again seat matpad replaced. Car no longer in warranty $2500. It is extremely dangerous that this passanger seat keeps failing. What if I got into an accident on highway and malfunction happened right before accident? Many people on bmw post complaining about seat belt warning and air bag malfunction. You can contact BMW, from 2017 until now, the car has neen in shop 4 times with passenger seatbelt and now airbag malfunction warnings. All services done at bmw of bayshore. I have included invoices I kept on this malfunctioned passenger seat
NHTSA ODI #11487492
Mileage unknown · Sep 24, 2022
Air BagsSeat BeltsSeats
Passenger seat in 2017 BMW 5 series cars have a well known and not covered fault where in a loud chiming will go off requiring the passenger seatbelt to be buckled. This chime does not stop and continues until the seat belt is buckled. There is nothing in the passengers seat. The noise is very loud and distracting. It o…
Read full complaint
Passenger seat in 2017 BMW 5 series cars have a well known and not covered fault where in a loud chiming will go off requiring the passenger seatbelt to be buckled. This chime does not stop and continues until the seat belt is buckled. There is nothing in the passengers seat. The noise is very loud and distracting. It occurs at random including driving at highway speeds. Upon bringing this to my dealer's attention they informed me that a service to repair this safety issue would cost over $2,000. I believe this will result in an unnecessary loss of life due to people either a) people fully removing the (sometimes valid) notifications of a no seatbelt warning, or b) an owner becoming alarmed by the sudden and loud chimes, possibly not knowing how to prevent the sound, and causing an accident If required I have a video of the incident (which happens daily now) if required. These issues are well documented on the BMW G30 forums for the 2017 model year.
NHTSA ODI #11486159
Mileage unknown · Mar 18, 2022
Electrical System
The Instrument Cluster Display Shakes and goes completely black unable to know haw fast Your driving with all the system down You never know when its going to happen
NHTSA ODI #11457316
Mileage unknown · Jan 25, 2022
Air BagsSeats
Front Passenger Seat Malfunction - Intermittent on and off warning No risk yet but BMW road aside assist confirmed that air bag might not deploy on passenger side Vehicle inspected by Irvine BMW and warning or concerns shown, just tried to bill me without root causing the issue. Yes the warning comes up on and off. Intermitt…
Read full complaint
Front Passenger Seat Malfunction - Intermittent on and off warning No risk yet but BMW road aside assist confirmed that air bag might not deploy on passenger side Vehicle inspected by Irvine BMW and warning or concerns shown, just tried to bill me without root causing the issue. Yes the warning comes up on and off. Intermittent.
NHTSA ODI #11448893
21,000 miles · Mar 18, 2021
Electrical SystemUnknown Or Other
BACKUP CAMERA IS BLACKING OUT. VERY DANGEROUS. THERE WAS A RECALL FOR 2018-19 BMW'S BUT NOT FOR 2017 BMWS. FORUMS ALSO REPORT A LOT OF PROBLEMS WITH THIS REVERSE CAMERA.
NHTSA ODI #11403652
Mileage unknown · Dec 10, 2020
Power Train
"REFILL COOLANT" INDICATOR DISPLAYS EVEN WITH FULL RESERVOIRS. TWO TRIPS TO THE DEALER SO FAR, FOR REPAIRS. COMES ON WHEN DRIVING OR WHEN PARKED, AFTER DRIVING; AFTER OPENING DRIVER DOOR. FOR EXAMPLE, DRIVE ONE DAY. PARKED OVER NIGHT. MESSAGE DISPLAYS NEXT DAY WHEN DRIVER DOOR IS OPENED. GOES AWAY AGAIN AFTER A DRIVE, WITH…
Read full complaint
"REFILL COOLANT" INDICATOR DISPLAYS EVEN WITH FULL RESERVOIRS. TWO TRIPS TO THE DEALER SO FAR, FOR REPAIRS. COMES ON WHEN DRIVING OR WHEN PARKED, AFTER DRIVING; AFTER OPENING DRIVER DOOR. FOR EXAMPLE, DRIVE ONE DAY. PARKED OVER NIGHT. MESSAGE DISPLAYS NEXT DAY WHEN DRIVER DOOR IS OPENED. GOES AWAY AGAIN AFTER A DRIVE, WITHOUT ADDING ANY FLUID. SAME EXACT ISSUE AS OTHERS ARE EXPERIENCING HERE: HTTPS://G30.BIMMERPOST.COM/FORUMS/SHOWTHREAD.PHP?T=1526216&PAGE=1
NHTSA ODI #11382938
20,000 miles · Sep 3, 2019
Service Brakes
TL* THE CONTACT OWNS A 2017 BMW 540I. WHILE DRIVING 55 MPH, THE CONTACT DEPRESSED THE ACCELERATOR PEDAL AND THE VEHICLE BEGAN TO JERK WITHOUT WARNING. WHEN THE VEHICLE WAS PULLED OVER, TURNED OFF, AND RESTARTED, IT RESUMED NORMAL OPERATION. ALSO, WHEN THE VEHICLE WAS ON ANY INCLINED HILL OR ROAD, THE BRAKES ENGAGED. THE VEHICLE …
Read full complaint
TL* THE CONTACT OWNS A 2017 BMW 540I. WHILE DRIVING 55 MPH, THE CONTACT DEPRESSED THE ACCELERATOR PEDAL AND THE VEHICLE BEGAN TO JERK WITHOUT WARNING. WHEN THE VEHICLE WAS PULLED OVER, TURNED OFF, AND RESTARTED, IT RESUMED NORMAL OPERATION. ALSO, WHEN THE VEHICLE WAS ON ANY INCLINED HILL OR ROAD, THE BRAKES ENGAGED. THE VEHICLE WAS TAKEN TO PRINCETON BMW (3630 QUAKERBRIDGE RD, HAMILTON TOWNSHIP, NJ 08619, (609) 528-4198) TO BE DIAGNOSED, BUT THE CAUSE OF THE FAILURE COULD NOT BE DETERMINED. THE VEHICLE WAS NOT REPAIRED; HOWEVER, THE DEALER REPLACED THE WINDSHIELD TO REPAIR THE BRAKE SENSORS AND INFORMED THE CONTACT THAT THE BRAKE SENSORS WERE LOCATED IN THE WINDSHIELD. THE FAILURE RECURRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. AN INVESTIGATION WAS PERFORMED, BUT NO FAILURES WERE FOUND. THE FAILURE MILEAGE WAS APPROXIMATELY 20,000.
NHTSA ODI #11252879
7,500 miles · Feb 27, 2018
Seat Belts
I HAD DROPPED OFF THE VEHICLE FOR SWAPPING OUT MY WINTER TIRES FOR ALL SEASON TIRES. THEIR TECHNICIANS REMOVED THE REAR SEAT BELT LATCHES AND INSTALLED THEM INCORRECTLY. THIS WORK WAS NEITHER APPROVED BY ME OR MENTIONED ON THE WORK ORDER. I WAS ALSO NOT VERBALLY INFORMED OF THIS WORK BEING PERFORMED. THIS WORK WAS CLEARLY NOT TE…
Read full complaint
I HAD DROPPED OFF THE VEHICLE FOR SWAPPING OUT MY WINTER TIRES FOR ALL SEASON TIRES. THEIR TECHNICIANS REMOVED THE REAR SEAT BELT LATCHES AND INSTALLED THEM INCORRECTLY. THIS WORK WAS NEITHER APPROVED BY ME OR MENTIONED ON THE WORK ORDER. I WAS ALSO NOT VERBALLY INFORMED OF THIS WORK BEING PERFORMED. THIS WORK WAS CLEARLY NOT TESTED OR COMPLETED PROPERLY BY THEIR TECHNICIANS. IT CAUSED THE REAR SEAT BELTS TO NOT LATCH INTO PLACE CORRECTLY AND I WAS UNABLE TO INSTALL MY CHILD'S CAR SEAT TO THE CAR SECURELY. THE WORK WAS PERFORMED BY BMW OF SPRINGFIELD NJ. HAD I NOT TRIED INSTALLING MY CAR SEAT, I WOULD NOT HAVE BEEN AWARE OF THIS ISSUE AND THERE IS A POSSIBILITY THAT ANYONE SITTING IN THE REAR RIGHT OR MIDDLE SEAT WOULD NOT BE SECURE DURING A CRASH.
BMW of North America, LLC (BMW) is recalling certain 2017 530i, 530i xDrive, 540i and 540i xDrive and 2017-2018 530e xDrive vehicles. Prior exposure to excessive levels of humidity within the driver and passenger head air bag inflators may affect the proper deployment of the head air bags.
Consequence & remedy
Consequence: In the event of a crash of sufficient severity, deployment of the head air bag may be impaired and/or the igniter could separate from the inflator, increasing the risk of injury.
Remedy: BMW will notify owners, and dealers will replace the left or right head air bag, free of charge. The recall began June 24, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Additional source detail variants (4)
Air Bags
BMW of North America, LLC (BMW) is recalling certain 2017 530i, 530i xDrive, 540i and 540i xDrive and 2017-2018 530e xDrive vehicles. Prior exposure to excessive levels of humidity within the driver and passenger head air bag inflators may affect the proper deployment of the head air bags.
Consequence: In the event of a crash of sufficient severity, deployment of the head air bag may be impaired and/or the igniter could separate from the inflator, increasing the risk of injury.
Remedy: BMW will notify owners, and dealers will replace the left or right head air bag, free of charge. The recall began June 24, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Air Bags:frontal:passenger Side:inflator Module
BMW of North America, LLC (BMW) is recalling certain 2017 530i, 530i xDrive, 540i and 540i xDrive and 2017-2018 530e xDrive vehicles. Prior exposure to excessive levels of humidity within the driver and passenger head air bag inflators may affect the proper deployment of the head air bags.
Consequence: In the event of a crash of sufficient severity, deployment of the head air bag may be impaired and/or the igniter could separate from the inflator, increasing the risk of injury.
Remedy: BMW will notify owners, and dealers will replace the left or right head air bag, free of charge. The recall began June 24, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Air Bags:frontal:driver Side:inflator Module
BMW of North America, LLC (BMW) is recalling certain 2017 530i, 530i xDrive, 540i and 540i xDrive and 2017-2018 530e xDrive vehicles. Prior exposure to excessive levels of humidity within the driver and passenger head air bag inflators may affect the proper deployment of the head air bags.
Consequence: In the event of a crash of sufficient severity, deployment of the head air bag may be impaired and/or the igniter could separate from the inflator, increasing the risk of injury.
Remedy: BMW will notify owners, and dealers will replace the left or right head air bag, free of charge. The recall began June 24, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Air Bags:frontal
BMW of North America, LLC (BMW) is recalling certain 2017 530i, 530i xDrive, 540i and 540i xDrive and 2017-2018 530e xDrive vehicles. Prior exposure to excessive levels of humidity within the driver and passenger head air bag inflators may affect the proper deployment of the head air bags.
Consequence: In the event of a crash of sufficient severity, deployment of the head air bag may be impaired and/or the igniter could separate from the inflator, increasing the risk of injury.
Remedy: BMW will notify owners, and dealers will replace the left or right head air bag, free of charge. The recall began June 24, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
2017 BMW 540I Problems, Complaints & Recalls | Skip That Year
Illustration