Vehicle Information: •Year, Make, Model: 2016 BMW 328i GT •VIN: Provide VIN •Mileage: Insert Mileage Description of the Problem: I am experiencing recurring drivetrain malfunctions and overheating issues with my 2016 BMW 328i GT, which is currently under a nationwide recall issued in August 2024. Despite having coolant in the sy…
Read full complaint
Vehicle Information: •Year, Make, Model: 2016 BMW 328i GT •VIN: Provide VIN •Mileage: Insert Mileage Description of the Problem: I am experiencing recurring drivetrain malfunctions and overheating issues with my 2016 BMW 328i GT, which is currently under a nationwide recall issued in August 2024. Despite having coolant in the system, the vehicle overheats and displays a “drivetrain malfunction” warning, forcing me to pull off the road and restart the car to temporarily clear the issue. Additionally, there appears to be a leak causing fluid to drip onto the belt and other components, further compromising the vehicle’s functionality and safety. My belt slips because of the leak and it has been severely deteriorated because of even after replacing it. The dealership has consistently advised me to repair this issue at my expense, quoting costs exceeding the value of the car. Only recently did I learn about the recall addressing this defect. The dealership has failed to provide timely solutions, leaving me without a drivable vehicle. Safety Concerns: These persistent issues pose serious safety risks. The drivetrain malfunction and overheating increase the likelihood of sudden breakdowns while driving, endangering myself and other road users. Pulling off unexpectedly also creates hazardous situations on highways or busy roads. Request for Action: I request that BMW resolve this recall promptly. If repairs cannot be completed within a reasonable timeframe, I demand compensation for my inability to use the vehicle, including reimbursement for expenses incurred during this period. Alternatively, BMW should provide me with a rental vehicle or replace my car with another comparable model free of defects. Failure to do so will prompt me to seek legal arbitration to recover damages and ensure accountability. Contact Information: [XXX] [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11652992
Mileage unknown · Nov 11, 2023
EnginePower TrainUnknown Or Other
car stops while driving, battery also draws while not in use. which is very dangerous. Already filed report with dealer ship for car. We will be having an another baby this winter and it is getting to the point where It can be very dangerous for my family. We got it checked but since it’s a manufacturer issue is what they said.…
Read full complaint
car stops while driving, battery also draws while not in use. which is very dangerous. Already filed report with dealer ship for car. We will be having an another baby this winter and it is getting to the point where It can be very dangerous for my family. We got it checked but since it’s a manufacturer issue is what they said. Since this car doesn’t have any recalls dealer doesn’t want to do anything. We noticed that many other cars of same year have the same problem.
NHTSA ODI #11554684
Mileage unknown · Oct 11, 2023
Power TrainService Brakes
The clip holding the emergency brake line is made out of plastic and mine broke (which I found out is common with these cars). When this happens, it rubs on the driveshaft which can wear through and sever the emergency brake line. This is a very dangerous situation and easily be avoided if BMW used a metal part vs. the current, …
Read full complaint
The clip holding the emergency brake line is made out of plastic and mine broke (which I found out is common with these cars). When this happens, it rubs on the driveshaft which can wear through and sever the emergency brake line. This is a very dangerous situation and easily be avoided if BMW used a metal part vs. the current, plastic flimsy one.
NHTSA ODI #11549479
Mileage unknown · Jul 26, 2023
Power TrainService BrakesUnknown Or Other
Need to recall as it is Common Knowledge among the BMW technicians that these vehicles are plagued with hazard of Parking / Emergency Break line clip breaking and for the line contacting the rotating drive shaft. The holding clip Mfg Part # 34406854898 breaks regularly ! the plastic parking brake retaining clip (BMW part # 34 …
Read full complaint
Need to recall as it is Common Knowledge among the BMW technicians that these vehicles are plagued with hazard of Parking / Emergency Break line clip breaking and for the line contacting the rotating drive shaft. The holding clip Mfg Part # 34406854898 breaks regularly ! the plastic parking brake retaining clip (BMW part # 34 40 6 854 898) deforms due to age/heat. The cable guide does not hold the cable in place anymore and Hazardously starts to rub against the rotating driveshaft, causing the Emergency parking lines which makes a noise that and sounds like coming from the center console. This is endangering the occupants, and also it is very costly replacement with the same plastic part again. This is such a prevalent issue that there are alternative clips being sold to replace for this manufactures omission of quality: [XXX] also there are videos on this [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11534592
Mileage unknown · Sep 20, 2022
Electrical SystemEnginePower Train
When I drive and come to a stop, the car shifts into nuetral. This has happened several times. I have to put the car in Park and restart it. We have checked the codes and have replaced the battery. The car only has 51k miles on it and is not driven more than 2-4 days a week.
NHTSA ODI #11485534
18,000 miles · Sep 3, 2020
EnginePower TrainCrashInjury
THIS HAPPENED TWO SEPARATE TIMES ABOUT 2 WEEKS APART.. THE CAR WAS STOPPED AT A STOPLIGHT. FOOT ON BRAKE. SUDDENLY ENGINE STARTED REVVING AND CAR LEAPED FORWARD. BRAKE DID NOT STOP IT. THE SECOND TIME, (AUGUST 31, 2020) THE CAR REARED-ENDED THE CAR IN FRONT, POSSIBLY CAUSING INJURY TO THAT DRIVER. NEITHER CAR WAS HARMED.
NHTSA ODI #11353027
30,000 miles · Feb 4, 2019
Power TrainUnknown Or Other
I WOULD LIKE TO NOTE THAT IT WAS THE DRIVESHAFT THAT CAUSED THIS. THE CONNECTION BETWEEN THE DRIVESHAFT AND THE FLANGE LOOSENED COMPLETELY. THERE ARE PREVIOUS RECALLS FOR THIS WITH BMW. THE VEHICLE WAS ON A HIGHWAY, GOING 65MPH AND ALL OF A SUDDEN THERE WAS VIBRATION AND NOISE FROM UNDERNEATH THE VEHICLE. ALL OF A SUDDEN IT SLO…
Read full complaint
I WOULD LIKE TO NOTE THAT IT WAS THE DRIVESHAFT THAT CAUSED THIS. THE CONNECTION BETWEEN THE DRIVESHAFT AND THE FLANGE LOOSENED COMPLETELY. THERE ARE PREVIOUS RECALLS FOR THIS WITH BMW. THE VEHICLE WAS ON A HIGHWAY, GOING 65MPH AND ALL OF A SUDDEN THERE WAS VIBRATION AND NOISE FROM UNDERNEATH THE VEHICLE. ALL OF A SUDDEN IT SLOWED DOWN TO THE POINT WHERE IT WOULD NO LONGER DRIVEABLE. I WAS GOING 5MPH (BARELY) TO GET OFF THE EXIT AND WAS NOT ABLE TO MAKE A TURN. I SHUT THE CAR OFF AND RESTARTED IT AND WAS ABLE TO MOVE TO A SAFE PARKING LOT 10 FEET AWAY. ONCE I WAS SAFE, THE CARE SHUTDOWN AND WAS NO LONGER ABLE TO TURN BACK ON. OIL WAS COMING OUT OF THE CAR.
NHTSA ODI #11174265
33,000 miles · Dec 18, 2018
Power TrainSuspensionUnknown Or Other
THE VEHICLE FRONT END WILL SHAKE AND LURCH LEFT AND RIGHT WHEN DRIVING AT FREEWAY SPEEDS. WHEN DRIVING AT OR BELOW 25MPH, AND A SMALL BUT SHARP BUMP IN THE ROAD IS DRIVEN OVER, THE ENTIRE STEERING COLUMN WILL SHAKE AND THE SUSPENSION IN THE FRONT (IN PARTICULAR THE DRIVERS SIDE) WILL MAKE A LOUD CLUNKING/POPPING SOUND. I'VE HA…
Read full complaint
THE VEHICLE FRONT END WILL SHAKE AND LURCH LEFT AND RIGHT WHEN DRIVING AT FREEWAY SPEEDS. WHEN DRIVING AT OR BELOW 25MPH, AND A SMALL BUT SHARP BUMP IN THE ROAD IS DRIVEN OVER, THE ENTIRE STEERING COLUMN WILL SHAKE AND THE SUSPENSION IN THE FRONT (IN PARTICULAR THE DRIVERS SIDE) WILL MAKE A LOUD CLUNKING/POPPING SOUND. I'VE HAD THE VEHICLE INSPECTED BY THE DEALERSHIP 2 TIMES. THEY TELL ME THAT THE NOISE IS NORMAL AND COMMON ON THIS YEAR AND MAKE. WHEN GOING ONLINE AND TYPING INTO GOOGLE "2016 BMW 328I STEERING NOISE/SUSPENSION NOISE" THERE ARE HUNDREDS OF REPORTS OF EXACTLY WHAT I'M EXPERIENCING. I'M AFRAID THAT THE VEHICLE WILL LOSE CONTROL AT SOME POINT IF THE STEERING OR SUSPENSION FAILS.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Consequence & remedy
Consequence: An electrical short increases the risk of a fire.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Consequence: An electrical short increases the risk of a fire.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
Engine And Engine Cooling:cooling System:pump
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Consequence: An electrical short increases the risk of a fire.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
2016 BMW 328I Problems, Complaints & Recalls | Skip That Year
Illustration