IllustrationI WAS HEARING RATTLE SOUND FROM THE CHASSIS WHILE DRIVING ON CITY STREET, TOOK IT THE DEALER AND FOUND OUT THE PARK BRAKE CABLE HOLDER IS BROKEN AND WAS HITTING THE THE SHAFT. THIS WILL LEAD TO GRID THE PARK BRAKE CABLE INTO THE DRIVE SHAFT AND CAUSE ACCIDENT. THAT PIECE SHOULD BE RECALL AND REINFORCE.
2014 BMW 328I
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2014 BMW 328I do not stand out strongly from the model-year median of 98.
About this comparison →How this year compares
Owner complaints by model year
Compare all 328I years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
230–25K
925–50K
2850–75K
1475–100K
7100–150K
2150K+
83 reports with mileage · 68 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Electrical System. Review the 52 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 29 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 29 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
19 crash reports2 fire reports12 injury reports
Service Brakes complaints
20 reportsTO AVOID A HEAD ON COLLISION, I WAS FORCED OFF ROAD. WHEN I MOVED OUT OF THE WAY I IMMEDIATELY APPLIED THE BREAKS WHICH THEN TOOK SOME TIME TO RESPOND AS IF IT WAS BLOCKED OR AS IF I DIDNT PRESS THE PEDAL. BY THE TIME I FELT SOME SORT OF STOPPING TENSION I WAS PUT INTO A POLE. AIRBAGS DID NOT DEPLOY.
MY 2014 SURGED AUTOMATICALLY IN A PARKING LOT AND THE BRAKES FAILED REPEATEDLY: IT TOOK ME OVER THE 4" CEMENT PARKING LOT STOPPER AND INTO A WALL! THIS WAS THE ONLY WAY THE VEHICLE WOULD STOP! IWILL SAY THAT JUST BEFORE I HAD BACKED OUT VERY SLOWLY AS I WAS IN A PARKING LOT. I HIT SOMETHIG, PUT MY FOOT ON THE BRAKE, THEN PUT C…
Read full complaint
MY 2014 SURGED AUTOMATICALLY IN A PARKING LOT AND THE BRAKES FAILED REPEATEDLY: IT TOOK ME OVER THE 4" CEMENT PARKING LOT STOPPER AND INTO A WALL! THIS WAS THE ONLY WAY THE VEHICLE WOULD STOP! IWILL SAY THAT JUST BEFORE I HAD BACKED OUT VERY SLOWLY AS I WAS IN A PARKING LOT. I HIT SOMETHIG, PUT MY FOOT ON THE BRAKE, THEN PUT CAR IN DRIVE TO PULL A FEW FEET BACK INTO THE PARKING SPOT. I USED VERY LITTLE GAS, NOT NECESSARY OF COURSE. BMW ENGINEERS EXAMINED IT AND FOUND NO ERROR ACCORDING TO THEIR THREE STANDARD TESTS. I WAS TOLD THAT THEIR TESTS "MAY NOT RECORD SOMETHING," "COULD NOT DUPLICATE MY CONCERNS," AND THAT IT WOULD TAKE "A MORE SEVERE IMPACT TO RECORD SOMETHING." NOTHING COULD BE TESTED OR RECORDED FOR SPEEDS UNDER 35 MILES PER HOUR. I GOT A CONCUSSION AND THE INCIDENT COST $ 17,000 (PLUS LOSS OF CAR VALUE). BMW DID NOTHING FOR ME SO I AM OUT OF A BMW FOR GOOD. I HAD JUST PUT THE CAR IN DRIVE TO PULL BACK INTO THE PARKING SPACE I WAS IN. IN ALL FAIRNESS I DID HIT SOMETHING, STOPPED, FOOT ON BRAKE PUT IT IN DRIVE. THERE IS NO WAY IT OUTGHT TO HAVE SURGED OUT OF CONTROL OR FAILED TO STOP. I WAS GOING LESS THAN 5 MPH. BMW WILL DO NOTHING FOR ME EXCEPT GIVE ME A COURTESY DISCOUNT ON A DIFFERENT BMW ONCE I'VE PURCHASED IT. THEIR DEALERS HAVE OFFERED ME LESS THAN COMPETITORS. I WON'T BUY ANOTHER ONE. ## VIN PASSED ## BMW 328I2014 ##
MY BRAKE PEDAL PAD CAME OFF OF MY BRAKE WHEN I WENT TO STOP BEHIND SOMEONE CAUSING ME TO GET IN AN ACCIDENT. I WAS TRAVELING ON A CITY STREET COMING UP TO TRAFFIC THAT WAS STARTING TO GO AT A TRAFFIC LIGHT THAT JUST TURNED GREEN. I BELIEVE THE RUBBER IS TOO SOFT ON THE BRAKE PEDAL PAD AND WAS NOT SEATED ON THE BRAKE ALL THE WAY …
Read full complaint
MY BRAKE PEDAL PAD CAME OFF OF MY BRAKE WHEN I WENT TO STOP BEHIND SOMEONE CAUSING ME TO GET IN AN ACCIDENT. I WAS TRAVELING ON A CITY STREET COMING UP TO TRAFFIC THAT WAS STARTING TO GO AT A TRAFFIC LIGHT THAT JUST TURNED GREEN. I BELIEVE THE RUBBER IS TOO SOFT ON THE BRAKE PEDAL PAD AND WAS NOT SEATED ON THE BRAKE ALL THE WAY DUE TO ME OR A PREVIOUS OWNER PULLING THE BOTTOM LEFT SIDE OFF OF THE BRAKE BY LIFTING THEIR FOOT UP FROM RESTING IT NEXT TO THE BRAKE. I HAVE A PHOTO OF THE PAD FROM AFTER THE ACCIDENT SHOWING INDENTATIONS ON THE BOTTOM LEFT OF THE PAD FROM WHERE THE BOTTOM LEFT CORNER WAS PULLED OFF THE BRAKE. WHEN I WENT TO SLOW DOWN IN TRAFFIC SO THE CAR IN FRONT OF ME COULD HAVE TIME TO SPEED UP, THE PAD SLIPPED OFF AND CAUSED ME TO HIT THE GAS PEDAL AND HIT THE CAR IN FRONT OF ME. MY COMPUTER REGISTERS WHAT HAPPENED FIVE SECONDS PRIOR TO IMPACT. IT SAYS THAT I WAS TRAVELING AT 21 MPH (THE SPEED LIMIT IS 35), THEN HIT THE GAS AND ACCELERATED A LITTLE BEFORE IMPACT, WHICH IS IN MY OPINION PROOF THAT MY FOOT SLIPPED OFF THE BRAKE. THE CAR IN FRONT OF ME WAS NOT STOPPED, THEY WERE ACCELERATING FROM BEING STOPPED IN TRAFFIC AT A LIGHT, BUT TRAVELING SLOWER THAN ME, WHICH IS WHY I WAS GOING 21 MPH SO CLOSE BEHIND THEM, BECAUSE I HAD APPROACHED THE TRAFFIC AFTER THEY ALREADY STARTED MOVING. I CONTACTED BMW AND THEY INSPECTED IT AND SAID THERE'S NOTHING WRONG WITH THE PAD AND THEREFORE WILL NOT BE COMPENSATING ME FOR THE ACCIDENT BY TAKING RESPONSIBILITY AND FIXING MY CAR. THAT MADE ME FEEL AS THOUGH THEY ARE NOT CONCERNED WITH MY PERSONAL SAFETY. THE DRIVER AND PASSENGER OF THE VEHICLE I HIT TOLD MY INSURANCE THEY WERE BOTH INJURED BUT I'M NOT SURE IF THEY ARE PURSUING THE INJURY CLAIM.
I WAS DRIVING 75 MPH ON THE INTERSTATE WHICH WAS THE SPEED LIMIT AND I VIVIDLY REMEMBER HAVING MY CRUISE CONTROL SET AT THAT SPEED, PLUS OR MINUS 2 MPH. I WAS DRIVING BEHIND A PICKUP TRUCK THAT WAS 8-10 SECONDS AHEAD OF ME. THE PICKUP TRUCK WASN'T EQUIPPED WITH CRUISE CONTROL LIKE MY BLACK 328I BMW WAS SO THEY (A COUPLE) WERE TR…
Read full complaint
I WAS DRIVING 75 MPH ON THE INTERSTATE WHICH WAS THE SPEED LIMIT AND I VIVIDLY REMEMBER HAVING MY CRUISE CONTROL SET AT THAT SPEED, PLUS OR MINUS 2 MPH. I WAS DRIVING BEHIND A PICKUP TRUCK THAT WAS 8-10 SECONDS AHEAD OF ME. THE PICKUP TRUCK WASN'T EQUIPPED WITH CRUISE CONTROL LIKE MY BLACK 328I BMW WAS SO THEY (A COUPLE) WERE TRAVELING SLOWER THAN I WAS AT THAT TIME. SO AS MY VEHICLE APPROACHES 4 SECONDS AWAY FROM THEIRS TRAVELING 75MPH (+ OR - 2 MPH). THEY BRAKED TO CHANGE LANES FROM THE LANE WE WERE TRAVELING TOGETHER TO THE OTHER LINE SINCE IT WAS A TWO LANE HIGHWAY. THEY DIDN'T SLAM THEIR BRAKES, THEY LIGHTLY PRESSED THEM BECAUSE A THIRD VEHICLE THEY WERE WAITING TO PASS IN ORDER TO SAFELY SWITCH LANES AND GIVE ME THE RIGHT AWAY. QUICKLY, I REACTED BY BRAKING AS WELL AND I COULD FEEL A HYDRAULIC LOCK IN THE BRAKE PEDAL. ALMOST LIKE I WAS TRYING TO PUSH DOWN ON CEMENT AND MY PEDAL WASN'T ACTING NORMAL WHILE BREAKING BUT ONLY HALF BREAKING LIKE IT WAS FULLY APPLIED WHEN I WAS PRESSING FIRMLY. I'M CONVINCED THAT THE VACUUM PUMP THAT SUPPLIES BRAKE POWER ASSISTANCE MAY HAVE BEEN MECHANICALLY FAULTY AND/OR FAILING FOR REASONS ONLY A MECHANIC COULD UNDERSTAND. NOW, I'VE BEEN A DRIVER FOR MANY YEARS AND THIS WAS MY FIRST BMW SO I DIDN'T KNOW WHAT TO THINK OF IT. I BOUGHT IT FOR A GREAT DEAL AT A PRE-OWNED CHEVY DEALERSHIP THAT SAID IT WAS ASE CERTIFIED BY THEIR MECHANICS PRIOR TO SELLING IT TO ME. SO WHY DID THIS HAPPEN TO ME? I'M ONLY 27 YEARS OLD, WITH THREE CHILDREN AND I COULD HAVE BEEN SERIOUSLY INJURED OR WORSE. I'M VERY SHAKEN UP BY THE WHOLE SITUATION BECAUSE THE LOSS OF BREAKING POWER PROVOKED AN UNAVOIDABLE COLLISION THAT MAKES ME LOOK LIKE A RECKLESS DRIVER WHEN JUST WANTED THE CAR TO STOP. IT JUST APPEARED THAT I COULDN'T BRAKE ON TIME BUT IN ACTUALITY, THE CAR SHOULD HAVE BEEN RECALLED FOR THIS.
WE WERE DRIVING DOWN A 35 MPH RD..I SLOWLY BEGAN TO BRAKE AS WE WERE APPROACHING A STOP LIGHT WHEN THE BRAKES DID NOT HOLD, I HIT THE BRAKE HARDER, THE CAR BEGAN TO BUCK FORWARD, I HIT THE BRAKE AS HARD AS POSSIBLE BUT THE BRAKES FAILED TO HOLD AND ONLY STOPPED WHEN IT HIT THE CAR IN FRONT OF US. THE POLICE CAME AND AN ACCIDEN…
Read full complaint
WE WERE DRIVING DOWN A 35 MPH RD..I SLOWLY BEGAN TO BRAKE AS WE WERE APPROACHING A STOP LIGHT WHEN THE BRAKES DID NOT HOLD, I HIT THE BRAKE HARDER, THE CAR BEGAN TO BUCK FORWARD, I HIT THE BRAKE AS HARD AS POSSIBLE BUT THE BRAKES FAILED TO HOLD AND ONLY STOPPED WHEN IT HIT THE CAR IN FRONT OF US. THE POLICE CAME AND AN ACCIDENT REPORT WAS MADE. I DESCRIBED THE BRAKE FAILURE TO THE OFFICER BUT THEY ONLY SEEMED INTERESTED IN WRITING UP THE ACCIDENT REPORT. WE HAD THE CAR TOWED TO OUR BODY SHOP AS WE WERE AFRAID TO DRIVE IN CASE THE BRAKES FAILED AGAIN. OUR INSURANCE COMPANY WAS MADE AWARE OF THE ACCIDENT AND BRAKE FAILURE AND A TASK FORCE IS LOOKING INTO IT. WHEN WE RETURNED HOME WE LOOKED UP THE POSSIBLE PROBLEM WITH BRAKES FAILING ON THE YEAR AND MODEL OF MY CAR. WE IMMEDIATE FOUND THREE ARTICLES LISTING MY EXACT CAR HAVING "RESTRICTED OIL SUPPLY FROM THE INTAKE CAMSHAFT TO THE BRAKE VACUUM PUMP,WHICH MAY CAUSE THE BRAKE VACUUM PUMP TO FAIL, RESULTING IN A LOSS OF POWER BRAKE ASSIST." IT ALSO SAID IN THE ARTICLE, BIMMERFEST, THAT BMW NOTIFIED NHTSA OF ITS INTENTION TO VOLUNTARILY RECALL MORE THAN 75,000 3 SERIES CARS DUE TO A POSSIBLE LOSS OF POWER BRAKE ASSIST THAT COULD RESULT IN THE VEHICLES FAILING TO STOP. A MANDATORY RECALL WAS NEVER ISSUED AND SO THIS PROBLEM STILL EXISTS. THIS IS EXACTLY WHAT OCCURRED WHEN TRYING TO STOP OUR CAR. WE HAVE REPORTED THE PROBLEM TO OUR INSURANCE CO AND BMW CORPORATE. WE ARE AWAITING AN ANSWER AND SOLUTION REGARDING OUR BRAKE ISSUE AND HOPE BMW WILL FINALLY REALIZE THERE IS A MAJOR PROBLEM AND WILL ADDRESS IT PROPERLY. AS OF NOW I WILL NOT DRIVE MY 2014 328I XDRIVE SEDAN UNTIL I AM COMFORTABLE THAT BMW CORRECTS THE ISSUE TO MY SATISFACTION AND SAFETY.
TL* THE CONTACT OWNS A 2014 BMW 328I. THE CONTACT STATED THAT THE BRAKE DRUM WAS RUSTED WITHOUT WARNING. THE VEHICLE WAS TAKEN TO A DEALER, BUT NOTHING COULD BE DONE. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND REFERRED THE CONTACT BACK TO THE DEALER. THE FAILURE WAS NOT REMEDIED. THE FAILURE MILEAGE WAS APPROXIMATELY 17,…
Read full complaint
TL* THE CONTACT OWNS A 2014 BMW 328I. THE CONTACT STATED THAT THE BRAKE DRUM WAS RUSTED WITHOUT WARNING. THE VEHICLE WAS TAKEN TO A DEALER, BUT NOTHING COULD BE DONE. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND REFERRED THE CONTACT BACK TO THE DEALER. THE FAILURE WAS NOT REMEDIED. THE FAILURE MILEAGE WAS APPROXIMATELY 17,000.
I WAS DRIVING MY 2014 BMW 328I XDRIVE, SLOWING FROM ~30MPH INTO AN INTERSECTION FOR A LEFT HAND TURN IN A RESIDENTIAL/SHOPPING AREA. UPON APPLYING THE BRAKES, THE BRAKE PEDAL MOVED BUT THE CAR DIDN'T SLOW. I THEN SMASHED THE BRAKE PEDAL TO THE FLOOR, STILL THE CAR DIDN'T SLOW. I CONTINUED HOLDING THE BRAKE PEDAL AND THE CAR SHOO…
Read full complaint
I WAS DRIVING MY 2014 BMW 328I XDRIVE, SLOWING FROM ~30MPH INTO AN INTERSECTION FOR A LEFT HAND TURN IN A RESIDENTIAL/SHOPPING AREA. UPON APPLYING THE BRAKES, THE BRAKE PEDAL MOVED BUT THE CAR DIDN'T SLOW. I THEN SMASHED THE BRAKE PEDAL TO THE FLOOR, STILL THE CAR DIDN'T SLOW. I CONTINUED HOLDING THE BRAKE PEDAL AND THE CAR SHOOK VIOLENTLY FINALLY STARTED SLOWING. ONCE SLOW ENOUGH TO MAKE THE TURN, I COASTED THROUGH THE INTERSECTION AND STOPPED ON THE SHOULDER. GOING THROUGH THE TURN AND THE INTERSECTION, I WAS BEHIND A DUMP TRUCK. THE ISSUE BROUGHT ME WITHIN INCHES OF SLAMMING INTO THE BACK OF THE TRUCK, BUT LUCKILY THE TRUCK TURNED IN TIME FOR ME NOT TO HIT IT. ONCE MY CAR WAS STOPPED ON THE SHOULDER, I CALLED THE BMW DEALERSHIP THAT I HAD JUST LEFT AND WAS ADVISED TO HIT THE SOS BUTTON AND HAVE MY CAR TOWED TO THEM. THE SERVICE ADVISOR (SA) RAN DIAGNOSTICS & TOOK THE CAR ON SEVERAL TEST DRIVES. HE SAID THAT NOTHING PINGED ON THE DIAGNOSTICS READING AND HE COULDN'T REPLICATE THE PROBLEM, SO MY CAR WOULD BE RETURNED TO ME. I CONTINUED RESEARCHING THE PROBLEM AND FOUND AN ARTICLE WHICH DESCRIBES THE SYMPTOMS THAT MY CAR HAD: HTTP://WWW.AUTOBLOG.COM/2013/09/28/BMW-3-SERIES-5-SERIES-X1-X3-Z4-BRAKE-RECALL/ AND SENT IT TO MY SA TO LOOK INTO. THE SA TOLD ME THAT MY ACCOUNT OF WHAT HAPPENED TO ME FIT THE DESCRIPTION OF RECALL, BUT SINCE MY CAR WAS BUILT IN 09/13 IT WAS 1 MONTH OUTSIDE OF THE RECALL RANGE, AND NO PREVENTATIVE WORK COULD BE DONE UNTIL A RECALL IS ISSUED. MY CAR WAS RETURNED TO ME WITHIN 1 DAY OF THE INCIDENT. WHEN INSPECTING MY PRINTED BMW SERVICE DOCUMENT, THE CUSTOMER SERVICE COMPLAINT IS IMPROPERLY LISTED AS 'THE CAR WAS VIBRATING BRAKING AND WOULD NOT START' (START NOT STOP). BMW ASSURED ME THAT THE PROPER PROBLEM WITH STOPPING WAS RECORDED IN THE COMMENTS SECTION OF THEIR DATABASE, BUT THAT THEY COULD NOT GO IN AND ALTER THE ISSUE DESCRIPTION.
I WAS DRIVING ON THE LOCAL HIGHWAY AND ATTEMPTED TO STOP ON RED LIGHT, THE CAR STOPPED FIRST AND THEN UNEXPECTELY JUMPPED UP, SLIDING FORWARD AND HIT THE FRONT VEHICLE WHILE BRAKE PEDAL WAS FULLY PRESSED. *TR
ON AUG, 7TH I WAS INVOLVED IN A MINOR ACCIDENT ON THE EXPRESSWAY. THE 1ST VEHICLE APPLIED THEIR BRAKES TO AVOID ANOTHER 2 CAR ACCIDENT, I APPLIED MY BRAKES AS WELL HOWEVER I WAS UNABLE TO SLOW DOWN IN TIME TO AVOID THE 1ST VEHICLE AND I REAR ENDED THE VEHICLE. BOTH VEHICLES HAD SLIGHT DAMAGED TO THEIR BUMPERS. NO INJURIES WERE …
Read full complaint
ON AUG, 7TH I WAS INVOLVED IN A MINOR ACCIDENT ON THE EXPRESSWAY. THE 1ST VEHICLE APPLIED THEIR BRAKES TO AVOID ANOTHER 2 CAR ACCIDENT, I APPLIED MY BRAKES AS WELL HOWEVER I WAS UNABLE TO SLOW DOWN IN TIME TO AVOID THE 1ST VEHICLE AND I REAR ENDED THE VEHICLE. BOTH VEHICLES HAD SLIGHT DAMAGED TO THEIR BUMPERS. NO INJURIES WERE REPORTED. DURING THE TIME OF ME APPLYING MY BRAKES I HAD ENOUGH TIME AND DISTANCE TO MAKE A JUDGMENT CALL TO A. HIT THE CALL IN FRONT OF ME OR B. HIT THE CONCRETE WALL MEDIUM, WHILE AT THE SAME TIME SAYING 'WOW' I AM REALLY ABOUT TO HIT THIS CAR. I WRESTLED WITH THE THOUGHT OF MY BRAKES MALFUNCTIONED THAT DAY. TAKING EVERYTHING INTO ACCOUNT ON A BRAND NEW CAR THE BRAKES FAILED. WHEN I APPLIED MY BRAKES IT SEEMS LIKE I GLIDED INTO THE OTHER CAR ALSO I HAD MY LUNCH BAG AND PURSE IN THE FRONT SEAT. NONE OF THE ITEMS IN THE FRONT SEAT WENT FLYING TO THE FLOOR. THEY WERE STILL IN TACK IN THE FRONT SEAT WHEN I PULLED OVER. FINALLY THIS IS MY 2ND BMW (1ST PURCHASE IN 2009) I KNOW HOW THEY DRIVE AND HANDLED IF THE CAR WAS OPERATING CORRECTLY I WOULD HAVE STOP WITH NO PROBLEM. I HAVE REACHED OUT TO BMW NORTH AMERICAN TO INQUIRE ABOUT RECALLS AND REPORT THE PROBLEM ON 8/25/2014 HOWEVER I HAVE NOT HEARD NOR BEEN ABLE TO GET IN CONTACT WITH MY CASE MANAGER TO DATE. *TR
Official recalls
825V871000 · Air Bags:side/window:head
Dec 17, 2025
BMW of North America, LLC (BMW) is recalling certain 2014 4 Series Coupe (428i, 428i xDrive, 435i, 435i xDrive), 3 Series Sedan (320i, 320i xDrive, 328i, 328i xDrive, 335i, 335i xDrive), and 2014-2015 2 Series Coupe (228i, 228i xDrive, M235i, M235i xDrive) vehicles. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.
Consequence & remedy
Consequence: An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.
Remedy: Dealers will replace the head air bags, free of charge. Owner notification letters were mailed February 12, 2026. Owners may contact BMW customer service at 1-800-525-7417.
24V608000 · Electrical System:wiring:connectors/plugs/receptacles; Engine And Engine Cooling:cooling System:pump
Aug 13, 2024
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Consequence & remedy
Consequence: An electrical short increases the risk of a fire.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
Additional source detail variants (2)
Electrical System:wiring:connectors/plugs/receptacles
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Consequence: An electrical short increases the risk of a fire.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
Engine And Engine Cooling:cooling System:pump
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Consequence: An electrical short increases the risk of a fire.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
24V527000 · Air Bags:frontal:driver Side:inflator Module
Jul 11, 2024
BMW of North America, LLC (BMW) is recalling certain 2015 6 Series Gran Coupe, 2014 5 Series Gran Turismo, 2014 5 Series Sedan, 2015 6 Series Convertible, 2015 6 Series Coupe, 2014 X5, 2013-2014 X3, 2014-2015 3 Series Sedan, 2014 4 Series Coupe, 2014 4 Series Convertible, 2014 3 Series Gran Turismo, and 2015 4 Series Gran Coupe vehicles. Please see the recall report for the complete list of models. The driver's air bag inflator may explode during deployment, due to a manufacturing defect.
Consequence & remedy
Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, increasing the risk of injury or death.
Remedy: The driver's front air bag will be replaced, free of charge. Owner notification letters were mailed September 6, 2024. Owners may contact BMW customer service at 1-800-525-7417.
24V288000 · Air Bags:side/window
Apr 24, 2024
BMW of North America, LLC (BMW) is recalling certain 2014-2015 2 Series Coupe (228i, 228i xDrive, M235i), 3 Series Sedan (320i, 320i xDrive, 328i, 328i xDrive, 335i, 335i xDrive, M3, 328d, 328d xDrive), 4 Series Coupe (428i, 428i xDrive, 435i, 435i xDrive, M4), and 2015 4 Series Gran Coupe (428i, 428i xDrive, 435i, 435i xDrive) vehicles. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.
Consequence & remedy
Consequence: An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.
Remedy: Dealers will replace the head air bags, free of charge. Owner notification letters were mailed November 4, 2024. Owners may contact BMW customer service at 1-800-525-7417.
15V520000 · Exterior Lighting
Aug 17, 2015
BMW North America, LLC (BMW) is recalling certain model year 2012-2015 320i, 320xi, 328i, 328xi, 335i, 335xi, and ActiveHybrid3 vehicles manufactured October 20, 2011, to June 22, 2015, 2014-2015 328xi Sports Wagon vehicles manufactured March 21, 2013, to March 17, 2015, 2014-2015 328d, 328xd vehicles manufactured June 28, 2013, to April 21, 2015, and 2014-2015 328xd Sports Wagon vehicles manufactured July 5, 2013, to April 21, 2015. The affected vehicles may have been programmed with new software that inadvertently makes the front side marker lights inoperative in conjunction with the parking lights or the headlights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: If the side marker lights do not illuminate, the vehicle may be less visible at night, increasing the risk of a crash.
Remedy: BMW will notify owners, and dealers will upload revised software to correct the issue, free of charge. The recall began on October 7, 2015. Owners may contact BMW customer service at 1-800-525-7417 or by email at CustomerRelations@bmwusa.com.
15V189000 · Fuel System, Gasoline:delivery:fuel Pump
Mar 31, 2015
BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.
Consequence & remedy
Consequence: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy: BMW will notify owners, and dealers will replace the fuel pump, free of charge. Owners were mailed interim notices on May 28, 2015. The recall began on July 6, 2015. Owners may contact BMW customer service at 1-800-525-7417.
14V627000 · Service Brakes, Hydraulic:power Assist:vacuum; Service Brakes, Hydraulic:power Assist:vacuum:hoses, Lines/piping, And Fittings
Oct 7, 2014
BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4 sDrive28i Roadster, and 2014 BMW 428i Coupe, and 428i xDrive Coupe. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail. Note: This recall is an expansion of recall 13V-454.
Consequence & remedy
Consequence: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy: BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1-800-525-7417.
Additional source detail variants (2)
Service Brakes, Hydraulic:power Assist:vacuum:hoses, Lines/piping, And Fittings
BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4 sDrive28i Roadster, and 2014 BMW 428i Coupe, and 428i xDrive Coupe. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail. Note: This recall is an expansion of recall 13V-454.
Consequence: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy: BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1-800-525-7417.
Service Brakes, Hydraulic:power Assist:vacuum
BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4 sDrive28i Roadster, and 2014 BMW 428i Coupe, and 428i xDrive Coupe. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail. Note: This recall is an expansion of recall 13V-454.
Consequence: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy: BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1-800-525-7417.
13V454000 · Service Brakes, Hydraulic:power Assist:vacuum; Service Brakes, Hydraulic:power Assist:vacuum:hoses, Lines/piping, And Fittings
Sep 26, 2013
BMW of North America LLC (BMW) is recalling certain model year 2012-2014 320i, 328i, 320i xDrive, and 328i xDrive sedans; model year 2014 328i xDrive Sports Wagons; model year 2012-2013 528i and 528i xDrive sedans, model year 2013-2014 X1 sDrive28i and X1 xDrive28i vehicles and model year 2012-2014 Z4 sDrive28i roadsters. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail.
Consequence & remedy
Consequence: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy: BMW will notify owners, and dealers will modify the vehicles to prevent insufficient vacuum pump lubrication, free of charge. The safety recall began on January 31, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Additional source detail variants (2)
Service Brakes, Hydraulic:power Assist:vacuum:hoses, Lines/piping, And Fittings
BMW of North America LLC (BMW) is recalling certain model year 2012-2014 320i, 328i, 320i xDrive, and 328i xDrive sedans; model year 2014 328i xDrive Sports Wagons; model year 2012-2013 528i and 528i xDrive sedans, model year 2013-2014 X1 sDrive28i and X1 xDrive28i vehicles and model year 2012-2014 Z4 sDrive28i roadsters. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail.
Consequence: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy: BMW will notify owners, and dealers will modify the vehicles to prevent insufficient vacuum pump lubrication, free of charge. The safety recall began on January 31, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Service Brakes, Hydraulic:power Assist:vacuum
BMW of North America LLC (BMW) is recalling certain model year 2012-2014 320i, 328i, 320i xDrive, and 328i xDrive sedans; model year 2014 328i xDrive Sports Wagons; model year 2012-2013 528i and 528i xDrive sedans, model year 2013-2014 X1 sDrive28i and X1 xDrive28i vehicles and model year 2012-2014 Z4 sDrive28i roadsters. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail.
Consequence: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Remedy: BMW will notify owners, and dealers will modify the vehicles to prevent insufficient vacuum pump lubrication, free of charge. The safety recall began on January 31, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
PE13030 · Loss Of Power Assist Braking
Opened Sep 6, 2013 · Closed Oct 25, 2013
Status: closed (inferred from source dates) · Service Brakes, Hydraulic:power Assist:vacuum
In a letter dated September 26, 2013, BMW Group submitted a safety recall notice to NHTSA identifying a defect condition in the vacuum pump oil supply that may result in loss of power assist braking in 76,191 model year (MY) 2012 through 2014 BMW 3-Series, 5-Series, X1 SAV, X3 SAV, and Z4 vehicles equipped with 4-cylinder engines (NHTSA Recall 13V-454).According to BMW, movement of the seal disk within the camshaft may result in blocking of the oil supply to the vacuum pump, resulting in improper pump operation and loss of power assist braking.On July 11, 2013, BMW initiated a change to the camshaft geometry that prevented the seal disk from blocking the oil port.BMW has not received any braking complaints related to loss of power assist after the design change was implemented in production.The owners of all affected vehicles will be contacted by mail and asked to take their vehicle to a BMW dealer who will install a locking ring into the camshaft to keep the seal disk in its proper location.BMW expects to begin dealer and owner notification in November 2013 and complete dealer and owner notification in December when the remedy is expected to be available.Based on the actions taken by BMW, this investigation is closed.