While performing a right turn, under normal acceleration a loud "pop/clunk" occurred. I immediately pulled into a parking lot as the vehicle was still able to drive. The vehicle runs as normal, no leaks of any kind present. Nothing visibly broken. Afterwards, I was able to determine with the vehicle suspended off of the ground,…
Read full complaint
While performing a right turn, under normal acceleration a loud "pop/clunk" occurred. I immediately pulled into a parking lot as the vehicle was still able to drive. The vehicle runs as normal, no leaks of any kind present. Nothing visibly broken. Afterwards, I was able to determine with the vehicle suspended off of the ground, I am getting power only to the front wheels. Utilizing google, it's easy to see that this has become a MASSIVE issue on this particular model TLX Type S. The vehicle will be taken to Acura on Monday Aug 18th 2025 for diagnostics, but it's quite obvious that the splines on the transfercase at the transmission mounting location have sheared completely, thus making the vehicle front wheel drive powered only. Given my current situation, my hope is that Acura will honor the power train warranty as it is my understanding that both the transmission and the transfercase are required to be replaced in this instance. Acura also needs to issue an updated transmission/ transfercase combination and a recall because this is happening way to often and it's quite an expensive repair.
NHTSA ODI #11681206
Mileage unknown · Jun 16, 2025
Power Train
Transfer case failure. Spline is stripped after 40k. AWD is disabled. Requires new transfer case and transmission
NHTSA ODI #11667060
Mileage unknown · Jun 7, 2025
Power Train
While driving normal, I heard a pop sound coming from the bottom of the car which resulted in my AWD not working. On acceleration the car would spin the front wheels and the traction light would light up. Took to dealer and they confirmed the transfer case and transmission failed and had to be replaced. The splines between both …
Read full complaint
While driving normal, I heard a pop sound coming from the bottom of the car which resulted in my AWD not working. On acceleration the car would spin the front wheels and the traction light would light up. Took to dealer and they confirmed the transfer case and transmission failed and had to be replaced. The splines between both components had stripped.
NHTSA ODI #11665477
Mileage unknown · Jun 5, 2025
Power Train
• Transfer Case failure, leading to transmission damage. • Vehicle gives no indication of Transfer Case failure, in turn, giving the Driver the impression that the vehicle is AWD. Potential risk to safety as the failure happened under normal driving conditions, vehicle suddenly jolts, with loss of power. • Problem addressed by D…
Read full complaint
• Transfer Case failure, leading to transmission damage. • Vehicle gives no indication of Transfer Case failure, in turn, giving the Driver the impression that the vehicle is AWD. Potential risk to safety as the failure happened under normal driving conditions, vehicle suddenly jolts, with loss of power. • Problem addressed by Dealership Service Dept. but not able to recreate, as this is a drivetrain fault. • Vehicle and components inspected by Dealership Service Dept. only. • No indications or warning lights for TC failure. AWD system on dashboard indicates power is going to all four wheels when this is not the case.
NHTSA ODI #11665179
Mileage unknown · Jun 5, 2025
Power Train
-Transmission and transfer case failed, specifically the splines on the input shaft connecting the two, rendering the vehicle FWD instead of AWD. Parts are not available to inspect as they were returned to dealer. -While the vehicle could still function in front wheel drive, the lack of AWD could be a safety risk in poor weather…
Read full complaint
-Transmission and transfer case failed, specifically the splines on the input shaft connecting the two, rendering the vehicle FWD instead of AWD. Parts are not available to inspect as they were returned to dealer. -While the vehicle could still function in front wheel drive, the lack of AWD could be a safety risk in poor weather or road conditions, especially given that the vehicle does not send an error code for this issue. -Problem was reproduced by the dealer, who replaced both parts after a 2-month wait for parts. -There is zero indication that these components failed, no error codes or anything. The car also displays how much power is going to each wheel on the gauge cluster, and displays just as it did when everything worked. The problem can only be noticed when using AWD, so many drivers may not know they have this issue. I experienced the traction control light blinking on hard acceleration due to front tire slip and understeer during turns, but beyond that there was no indication anything was wrong. -The dealer informed me this would be a $12,000 repair out of warranty, which I find unacceptable given that the car doesn't give any error codes. Many many people may not know their car is effected.
NHTSA ODI #11665162
Mileage unknown · Jun 2, 2025
Power Train
At 36,823 miles and October 11,2024 I was taking off from a stop. About 10 seconds into my take off I heard a loud bang and hard jerk. Dash cam caught it happening. As soon as it happened I was still moving forward but just coasting. As soon as I accelerated a tiny bit it sounded like metal being beaten around inside something. …
Read full complaint
At 36,823 miles and October 11,2024 I was taking off from a stop. About 10 seconds into my take off I heard a loud bang and hard jerk. Dash cam caught it happening. As soon as it happened I was still moving forward but just coasting. As soon as I accelerated a tiny bit it sounded like metal being beaten around inside something. No warning light or CEL came on. Nothing. After I parked it the sound disappeared and it seemed to drive fine but a little different. I noticed then that I would lose traction easily and my front wheels would spin out like a fwd Civic. I called the dealership immediately and told them what happened. They put a note in my file. They said they couldn’t do anything unless it happened again. I had to go to the dealership 3 separate times to try to get them to look at it. At the third trip and me being a little pissy that they took me seriously and found out that in fact my rear wheels wouldn’t spin and my driveshaft wasn’t spinning either. In December of 2024 my transfer case and transmission were replaced under warranty. The splines in the transmission were totally stripped.
NHTSA ODI #11664344
Mileage unknown · May 24, 2025
Power Train
Transfer case failed, awd system inoperable. Only front wheel drive when it is suppose to be awd. Vehicle is at the acura dealership getting repaired
NHTSA ODI #11662895
Mileage unknown · May 23, 2025
Power Train
2021 Acura TLX Type S. Car has 53k miles on it. No modifications, bone stock. When accelerating from a stop at ~50% throttle, there was a sudden loud pop from the front of the car, followed by immediate loss of power to the back wheels (AWD car) . The vehicle was about to shift from first to second gear, so thankfully I was stil…
Read full complaint
2021 Acura TLX Type S. Car has 53k miles on it. No modifications, bone stock. When accelerating from a stop at ~50% throttle, there was a sudden loud pop from the front of the car, followed by immediate loss of power to the back wheels (AWD car) . The vehicle was about to shift from first to second gear, so thankfully I was still only going about 10-15 mph at the time. Had i been traveling faster, turning, or if the roads were wet/slick, it could have caused an accident due to my loss of control of the car. There were no warning lights or indication prior to this occurring, and no warning lights or indication after the incident occurred either. In fact, the torque distribution screen on the console showed power to the back wheels, despite that not being true. All recommended maintenance and oil changes were performed on the car at appropriate times. The problem ended up being a completely stripped transfer case housing / damaged splined shaft on the transmission (picture of transfer case attached). This was finally diagnosed after 2-3 weeks once the dealer lifted the vehicle and checked for power in all 4 wheels (of which only the front two tires would spin). Dealer replaced the parts under warranty after it was shown that the back wheels had no power. However, I believe the same part number was used in the replacement, indicating a potential likelihood of another failure in the future if this part is defective. I'm not sure if this has been reported by others, but I was only able to identify the problem by finding a post on an owners forum that showed identical problems to mine. Conversations in other owners groups suggests this is a wide spread problem with the early renditions of the new Acura TLX Type S line (~2021-2023). A poll in a TLX Type S Owner facebook group I am in, indicated that 16% of folks have had similar failures (out of 170 members polled).
NHTSA ODI #11662805
Mileage unknown · Apr 2, 2025
Power Train
AWD system is no longer working. Every time I accelerate the front wheels are slipping and there are no warning lights or system failure messages. I believe this is a transfer case issue as there are now videos on YouTube about TLX Type S's having this issue.
NHTSA ODI #11652239
Mileage unknown · Apr 1, 2025
Power Train
I was driving and was making a right turn at a stop light. I stopped, then took a right. As I took the right, I throttled a little from 5-10 mph and my transfer case blew up and made a loud bang and lost power to my rear wheels. Along with losing power to my rear wheels, the computer still did not recognize this mechanical failu…
Read full complaint
I was driving and was making a right turn at a stop light. I stopped, then took a right. As I took the right, I throttled a little from 5-10 mph and my transfer case blew up and made a loud bang and lost power to my rear wheels. Along with losing power to my rear wheels, the computer still did not recognize this mechanical failure. The dash has a feature that shows power to each wheel and when the cars rear power wasn’t working, this feature showed power still. Along with this failure, immediately after the loud bang, the car was jerking and there was sounds of clunking in the rear.
Honda (American Honda Motor Co.) is recalling certain 2022-2025 Acura MDX Type-S, 2023-2025 Honda Pilot, and 2021-2025 Acura TLX Type-S vehicles. A software error in the fuel injection electronic control unit (FI-ECU) may cause an engine stall or a loss of power.
Consequence & remedy
Consequence: An engine stall or loss of power can increase the risk of a crash or injury.
Remedy: Dealers will reprogram the FI-ECU software, free of charge. Owner notification letters were mailed March 17, 2025. Owners may contact Honda's customer service at 1-888-234-2138. Honda's numbers for this recall are EL1 and AL0.
Additional source detail variants (2)
Electrical System:software
Honda (American Honda Motor Co.) is recalling certain 2022-2025 Acura MDX Type-S, 2023-2025 Honda Pilot, and 2021-2025 Acura TLX Type-S vehicles. A software error in the fuel injection electronic control unit (FI-ECU) may cause an engine stall or a loss of power.
Consequence: An engine stall or loss of power can increase the risk of a crash or injury.
Remedy: Dealers will reprogram the FI-ECU software, free of charge. Owner notification letters were mailed March 17, 2025. Owners may contact Honda's customer service at 1-888-234-2138. Honda's numbers for this recall are EL1 and AL0.
Fuel System, Gasoline:fuel Injection System
Honda (American Honda Motor Co.) is recalling certain 2022-2025 Acura MDX Type-S, 2023-2025 Honda Pilot, and 2021-2025 Acura TLX Type-S vehicles. A software error in the fuel injection electronic control unit (FI-ECU) may cause an engine stall or a loss of power.
Consequence: An engine stall or loss of power can increase the risk of a crash or injury.
Remedy: Dealers will reprogram the FI-ECU software, free of charge. Owner notification letters were mailed March 17, 2025. Owners may contact Honda's customer service at 1-888-234-2138. Honda's numbers for this recall are EL1 and AL0.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
DP26001 · All Wheel Drive Allegation
Opened Mar 6, 2026 · Closed Aug 4, 2026
Status: closed (inferred from source dates) · Power Train:automatic Transmission; Power Train:automatic Transmission:internal:shaft:output; Power Train:transfer Case (4-WHEEL Drive)
The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction. However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied. A denial report will be posted in the Federal Register. The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances. The Petition can be viewed at NHTSA.gov under ODI Number 11712885.
Additional source detail variants (3)
Power Train:automatic Transmission
The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction. However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied. A denial report will be posted in the Federal Register. The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances. The Petition can be viewed at NHTSA.gov under ODI Number 11712885.
Power Train:automatic Transmission:internal:shaft:output
The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction. However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied. A denial report will be posted in the Federal Register. The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances. The Petition can be viewed at NHTSA.gov under ODI Number 11712885.
Power Train:transfer Case (4-WHEEL Drive)
The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction. However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied. A denial report will be posted in the Federal Register. The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances. The Petition can be viewed at NHTSA.gov under ODI Number 11712885.
2021 Acura Tlx Type S Problems, Complaints & Recalls | Skip That Year
Illustration