2004 Acura Tl

THE DASHBOARD PANEL OF MY 04 ACURA TL IS SEVERELY CRACKED. MY CONCERN IS IF IN THE EVENT AN AIRBAG DID DEPLOY DUE TO FALSE SENSORS OR EVEN DUE TO AN ACCIDENT, HOW MUCH DAMAGE WILL THIS CAUSE ME? I UNDERSTAND THAT AN AIRBAG WILL ANNIHILATE THE DASH IF ACTIVATED AND HOPEFULLY DAMAGES ARE MINIMAL BUT THAT WAS TESTED WITH A DASHBOARD PANEL THAT WAS FULLY INTACT. I'M A LITTLE CONCERNED SINCE I ALSO HAVE 98 FORERUNNER AND THE DASH PANEL IS NEARLY EMACULANT. I FEEL THERE IS A MANUFACTURING DEFECT IN THE PLASTIC IN THESE VEHICLES THAT SHOULD BE RECALLED AND FIXED.

MY 2004 ACURA TL IS MY FIRST CAR OWNED. WHEN I PUT THE CAR IN DRIVE I CAN ONLY ACCELERATE TO 20-30MPH ON THE HIGHWAY. BECAUSE, THE CAR WOULD NOT ACCELERATE ON A STRAIGHT WAY OR UP HILLS. THIS IS A DANGEROUS MANUFACTURE MALFUNCTION WITH ACURA TRANSMISSIONS FOR THE CONSUMERS FINANCIALLY AND PHYSCIALLY. I WOULD APPRECIATE A RECALL BEING DONE ON MY 2004 ACURA TL BECAUSE I LOVE THIS CAR AND WOULD LOVE TO KEEP IT. I AM A COLLEGE STUDENT AND DO NOT HAVE THE MONEY TO INSTALL ANOTHER TRANSMISSION AND THE SAME THING HAPPENS AGAIN. I HAVE READ MANY REVIEWS ABOUT TRANSMISSINS FAILURES ON HONDA/ACURA TRANSMISSIONS. I THOUGHT ACURA WAS A GREAT BRAND, BUT ACURA CEO AND HEADQUARATERS HAVE TO KNOW THAT CONSUMERS ARE FRUSTRATED AND ANGRY REGARDING TRANSMISSIONS AND OTHER RELATED ISSUES DUE TO THE TRANSMISSIONS.

THERE IS A VERY COMMON ISSUES GOING ON WITH THESE ACURA FROM 2000 UP TO 2008. WITH TRANSMISSION GOING BAD. I RESEARCH IT AND FOUND OUT WITH EVERY SHOP AND PEOPLE ONLINE HAVING TRANSMISSION BREAK DOWN WITH THOSE ACURA TL 2000 UP TO 2005.PLEASE CAN SOMEONE INVESTIGATE THIS. THERE SHOULD BE A RECALL FOR THIS AT SOME POINT. THE STOP ACCELERATING WHILE I WAS DRIVING IT ON THE HIGHWAY.THAT WAS A VERY BIG SAFETY ISSUE FOR ME.

TL* THE CONTACT OWNS A 2004 ACURA TL. WHILE DRIVING 40 MPH, THE VEHICLE FAILED TO SHIFT INTO ANOTHER GEAR EVEN WITH THE ENGINE REVVING. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHO DIAGNOSED THAT THE GEARS FAILED BECAUSE THE SECOND OR THIRD GEAR WAS NOT GETTING ENOUGH LUBRICATION TO SHIFT PROPERLY. THE CONTACT STATED THAT THE VEHICLE EXHIBITED THE SAME SYMPTOMS AS LISTED IN NHTSA CAMPAIGN NUMBER: 04V176000 (POWER TRAIN). THE VEHICLE WAS NOT TAKEN TO A DEALER. THE MANUFACTURER STATED THAT THE VEHICLE WAS NOT INCLUDED IN ANY RECALLS. THE FAILURE MILEAGE WAS 130,000.

AT ABOUT 8 YRS AGO, CRACKS STARTED TO APPEAR AROUND THE PASSENGER SIDE AIBAG ON TOP OF THE DASHBOARD. THE CRACKS HAVE MULTIPLIED AND LENGTHENED SINCE THAT TIME SO THAT NOW THEY APPEAR DANGEROUSLY CLOSE TO BEING INCAPABLE OF RESTRAINING THE AIRBAG. I DO NOT KNOW WHY ACURA NEVER ISSUED A RECALL AS I HAVE SEEN NUMEROUS COMPLAINTS FROM OTHERS WITH THIS SAME DEFECT. THIS PROBLEM SEEMS TO BE PREVALENT IN ACURA TL MODELS 2004 THRU 2008.

THE AFTERMARKET ULTRA-POWER K500117 {#51210SEPA01} (ECONOMY) BALL JOINT REPRESENTS A SEVERE SAFETY HAZARD. IT CAN RESULT IN SEPARATION OF THE LOWER CONTROL ARM. THE JPG ULTRA-POWER K500117 {#51210SEPA01} (ECONOMY) AFTER FAILURE SHOWS THE LOWER CONTROL BUSHING RIPPED FROM THE LLOWER CONTROL ARM. JPG BECK/ARNLEY 1027932 BUSHING CLOSE-UP IS IDENTICAL DESIGN AS THE ACURA OEM PART. THIS BUSHING IS PRESSED INTO THE CONTROL ARM FROM THE TOP. FROM THE FACTORY, ONCE THE BALL JOINT IS IN PLACE, THE RETAINER NUT HOLDS BOTH THE BALL JOINT AND BUSHING SECURELY IN THE CONTROL ARM. THE FACTORY FLANGED NUT IS LARGER THAN THE BUSHING DIAMETER AS TO ENSURE CONTACT WITH THE CONTROL ARM UNDERSIDE. OBSERVE THE NUT IN .JPG ULTRA-POWER K500117 {#51210SEPA01} (ECONOMY)'S. IT IS A STANDARD LOCK NUT. THE DIAMETER IS TOO SMALL. IT MAKES NO CONTACT WITH THE CONTROL ARM, BUT RATHER SEATS DIRECTLY TO THE BUSHING. THE BUSHING IS ONLY PRESSED IN, AND WILL EVENTUALLY PULL OUT. AS CAN BE SEEN IN THE AFTER FAILURE PICTURE, THERE IS NO WAY THE NUT COULD HOLD THE BALL JOINT AND BUSHING IN PLACE AS ACURA (HONDA) DESIGNED IT TO DO. PLEASE LOOK AT THE NUT OF THE MOOG K500117 AS AN EXAMPLE OF A CORRECTLY DESIGNED BALL JOINT AND NUT, AND HOW THE NUT IS FLANGED. THIS IS THE CORRECT STYLE NUT AS IT WILL MAKE CONTACT WITH THE LOWER CONTROL ARM INSTEAD OF ONLY THE PRESSED IN BUSHING. IT CAN BE EASILY SEEN IN THE SECOND PICTURE THAT THE NUT IS CLEARLY SMALLER THAN THE CONTROL ARM BUSHING. ORDER NUMBER 82540335 THROUGH ROCK AUTO WAS PURCHASED ON 4/12/2018. THE BALL JOINT, BUSHING AND NUT SIMPLY PULLED OUT. THE LOWER CONTROL ARM IS DESTROYED, AS IS THE CV AXLE. DAMAGE TO THE FENDER AND FENDER SKIRT AS WELL. IT IS FORTUNATE THIS FAILURE HAPPENED WHILE TURNING INTO A PARKING LOT RATHER THAN AT HIGHWAY SPEEDS JUST MOMENTS BEFORE.

LAST WEEKEND I WAS DRIVING IN THE HIGHWAY ALL SUDDEN MY CAR LOSE POWER AND THE TRANSMISSION BECAME NOT ENGAGED WITH ENGINE AND ALMOST GOT INTO A MAJOR ACCIDENT. THE CAR WAS PERFORMED PERFECTLY BEFORE THAT. I KEPT THE CAR IN TOP CONDITION NEVER HAD ANY ISSUES. SO THE CAR WAS TOWED HOME AND I TRIED TO DIAGNOSE THE ISSUE AND FOUND OUT THAT THE TRAMISSION FILTER WAS BAD AND THE LOOSE FILTER COMPONENTS GOT STUCK IN THE AFTER FILTER HOSE BOLT. ACCORDING TO THE OWNERS MANUAL TRANSMISSION FILTER DOES NOT HAVE ANY MAINTENANCE SCHEDULED TO CHANGE THE FILTER. MY CAR HAS ABOUT 170,000 MILES. WHEN THE FILTER GETS OLD AND BECOME BRITTLE AND BREAKS APART AND BLOCK THE FLUID PASSAGE CAUSES MY TRAMISSION TO FAIL. PLEASE SEE ATTACHED FOR THE PICTURES WITH FILTER MATERIAL STUCK IN THE FILTER BOLT.