← New search

2022 Acura Mdx

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2022 Acura Mdx do not stand out strongly from the model-year median of 101.5.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Mdx years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 13 of 149 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Power Train. Review the 63 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Steering. Review the 19 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

6 crash reports2 fire reports4 injury reports

What owners actually said

149 reports
Mileage unknown · Apr 13, 2026
Power Train

Complete drivetrain failure while accelerating from a complete stop in the middle of a busy intersection. No warning lights or hazard messages were activated before or after the failure. The car made a massive clunking/banging sound and continued to clunk on acceleration. The car had to be towed to the dealership. My children we…

Read full complaint

Complete drivetrain failure while accelerating from a complete stop in the middle of a busy intersection. No warning lights or hazard messages were activated before or after the failure. The car made a massive clunking/banging sound and continued to clunk on acceleration. The car had to be towed to the dealership. My children were in the car with me, and we had just driven on the highway for 45 minutes before this failure. Luckily, my husband was behind me, and I activated hazards until I could pull over safely. It was jerking and clunking so badly that I was barely able to steer. It was terrifying since my two young children were in the car, and they were both screaming from the noise. I believe I would have been rear-ended if my husband had not been behind me due to the sudden jerk from the failure, as I was the first car in the left turn lane. This is not the first issue I have had with the transfer case in this vehicle. The affected transfer case and drive train were replaced only 7 months prior due to a faulty transfer case and a severe clunking sound. This vehicle has had repeated drivetrain failures without warning, resulting in loss of traction and control. The recent failure reflects a completely stripped spline connecting the transfer case and transmission. This will be the 4th transfer case this vehicle has had at only 64K miles. All recommended maintenance and care have been completed at the certified Acura dealership since the vehicle was purchased. Recently, the 60K services were completed just 3 months prior to the current failure. The vehicle is currently at the dealership for repairs under warranty, as it needs a new transmission and another transfer case. I have not yet received the documentation, as the car is not in my possession, but I will provide it once I receive it. See the attached documentation from the previous failure, dated 6/3/2025, to establish a pattern of catastrophic drivetrain failure.

NHTSA ODI #11730946

Mileage unknown · Apr 12, 2026
Power Train

I was at a stop light, when the lights turned green, I accelerated and heard a loud bang underneath the vehicle. The sound was so loud I thought I had been rear ended. I got out to inspect the vehicle and did not see any damages. I got back into the vehicle and put it in drive to get to the closed gas station. When I started dr…

Read full complaint

I was at a stop light, when the lights turned green, I accelerated and heard a loud bang underneath the vehicle. The sound was so loud I thought I had been rear ended. I got out to inspect the vehicle and did not see any damages. I got back into the vehicle and put it in drive to get to the closed gas station. When I started driving, I heard clunking sounds underneath vehicle. I put on my hazards and drove slow. After about 50-100 ft the clunking sounds went away. No lights on the dash or anything. I then got vehicle towed to my father’s shop to inspect what was going or what happened due to not feeling safe driving. One of his employees looked up the cause of the noise and had found that the differential splines or transfer case would strip and cause a loud bang. Which happens on a lot of these acuras. He put vehicle on lift, and put it into drive. The front wheels would spin, but not the rear wheels. He said that indicates the transfer case is bad

NHTSA ODI #11730677

Mileage unknown · Apr 8, 2026
Power Train

Experienced loss of all wheel drive with no notification, warning lights, etc. Vehicle is only in front wheel drive. Issue caused the vehicle to perform very poorly in inclement weather and myself, wife and children became stuck in the snow. The problem has been confirmed with Acura dealership. Currently it is in the shop awaiti…

Read full complaint

Experienced loss of all wheel drive with no notification, warning lights, etc. Vehicle is only in front wheel drive. Issue caused the vehicle to perform very poorly in inclement weather and myself, wife and children became stuck in the snow. The problem has been confirmed with Acura dealership. Currently it is in the shop awaiting further info.

NHTSA ODI #11729954

Mileage unknown · Apr 8, 2026
Power Train

The AWD system failed and now its only FWD

NHTSA ODI #11729848

Mileage unknown · Apr 2, 2026
Service Brakes

Asymmetrical wear on the front brakes. The outer pad wears out completely while the inner pad( with the brake wear sensor) shows almost no wear. The dealer (Park Place Acura, Plano Texas) brought this to my attention on November 3, 2025 saying only the front pads needed replacing but did not disclose the asymmetrical wear. I too…

Read full complaint

Asymmetrical wear on the front brakes. The outer pad wears out completely while the inner pad( with the brake wear sensor) shows almost no wear. The dealer (Park Place Acura, Plano Texas) brought this to my attention on November 3, 2025 saying only the front pads needed replacing but did not disclose the asymmetrical wear. I took the vehicle back to the Dealer January 15, 2026 for repair after discovering the asymmetrical pad wear and pointed that out to them. The brakes can completely wear to the backing plate on the outer pad while showing no wear issues with the brake sensor on the inner pad. This condition creates an unpredictable and uneven braking response that constitutes a safety defect, as the brake wear indicator system fails to alert the driver to actual brake wear on the outer pad. The brake wear sensor is designed assuming symmetrical pad wear. When wear is asymmetrical, the sensor fails to trigger a warning, leaving the driver unaware of a dangerous condition. The dealer has finally replaced the pads and rotors, symptoms of the problem but, has not addressed the underlying cause of the problem...the calipers. I have received the vehicle back from the dealer but did not sign a release and the issue remains open. The vehicle currently has approximately 29,400 miles. I have taken this issue to Acura corporate(Honda Motor Company) and they have it under review but keep delaying with no confirmed resolution. I sent a certified letter to American Honda Motor Company, Acura client relations on February 3, 2026 and they signed for it on February 11, 2026 and contacted me by email on March 11,2026. Acura took 28 days to respond to my certified letter and has provided no resolution timeline since.The vehicle was under the original manufacturers warranty at the time of this issue and notification.

NHTSA ODI #11728752

Mileage unknown · Mar 27, 2026
Power TrainCrash

My vehicle stopped handling as it usually had and I at a significant decrease in traction and slid off the road and slammed into a road sign. No injuries but significant damage to the vehicle. It seemed as though the all-wheel drive was not working. No warning lamps and computer system indicated that all four wheels were getting…

Read full complaint

My vehicle stopped handling as it usually had and I at a significant decrease in traction and slid off the road and slammed into a road sign. No injuries but significant damage to the vehicle. It seemed as though the all-wheel drive was not working. No warning lamps and computer system indicated that all four wheels were getting power. Took it to dealer and they confirmed that the all-wheel drive system has failed. Splines in the transfer case stripped and transmission needs to be replaced

NHTSA ODI #11727533

Mileage unknown · Mar 24, 2026
Electrical SystemSuspensionUnknown Or Other

I am filing a complaint regarding my 2022 Acura MDX Type S with approximately 70,700 miles. The vehicle developed a suspension system warning, and upon inspection by an Acura dealership, I was informed that the suspension stroke sensor and floor wiring harness are corroded and require replacement. I was quoted approximately $12,…

Read full complaint

I am filing a complaint regarding my 2022 Acura MDX Type S with approximately 70,700 miles. The vehicle developed a suspension system warning, and upon inspection by an Acura dealership, I was informed that the suspension stroke sensor and floor wiring harness are corroded and require replacement. I was quoted approximately $12,000 for the repair. This failure is extremely concerning because the vehicle is only a few years old and this type of corrosion affecting a major wiring harness should not occur under normal operating conditions. The affected components are part of the suspension system, which directly impacts vehicle handling and safety. Due to the failure, the suspension system may not function properly, potentially affecting ride height, stability, and overall control of the vehicle. This raises safety concerns, especially at highway speeds or during emergency maneuvers. There was no prior warning of water intrusion or external damage that would reasonably explain this level of corrosion. This appears to be a premature failure of a critical electrical component. Acura has only offered minimal goodwill assistance, leaving the majority of this extremely costly repair as the responsibility of the owner. I am concerned that this may be a broader issue affecting other vehicles and that it could pose a safety risk if not addressed. I am requesting that this issue be investigated. Thank you.

NHTSA ODI #11726624

Mileage unknown · Mar 21, 2026
SuspensionUnknown Or Other

MDX Type S with 63k miles. After performing diagnostic check there were several fault codes related to the vehicle's suspension system. Upon inspection, they identified issues with the ride height (stroke) sensors and wiring. The right rear, left rear, and right front sensors are affected. The right rear sensor has a broken pin,…

Read full complaint

MDX Type S with 63k miles. After performing diagnostic check there were several fault codes related to the vehicle's suspension system. Upon inspection, they identified issues with the ride height (stroke) sensors and wiring. The right rear, left rear, and right front sensors are affected. The right rear sensor has a broken pin, and part of that pin is stuck in the wiring connector. The left rear sensor also has a pin that is corroded. Additionally, the main wiring harness along the floor is corroded. This is due to poor location of wire harness in the Type S, and corrosion was due to salt exposure from icy roads. Dealership confirmed this was a known issue and had about a dozen of these replacements in the last few months.

NHTSA ODI #11726051

Mileage unknown · Mar 20, 2026
Unknown Or Other

All Wheel Drive system failure. My vehicle's all wheel drive system failed during a snow storm, it reverted to Front wheel drive only.

NHTSA ODI #11725984

Mileage unknown · Mar 20, 2026
Service Brakes

Vehicle has a service bulletin issued by NHTSA and Honda/Acura of North America refuses to acknowledge it or fix the problem. for 4 years. Service Bulletin 24-025

NHTSA ODI #11725742

Official recalls

2

26V332000 · Air Bags:sensor:occupant Classification:front Passenger

May 21, 2026

Honda (American Honda Motor Co.) is recalling certain 2018-2021, 2023 Acura TLX, 2019-2024 RDX, 2017-2020, 2022-2026 MDX, 2017-2021, 2023, 2025 Honda Ridgeline, 2017-2022 Pilot, 2019-2021 Passport, 2018-2026 Odyssey, 2019-2022 Insight, 2019-2021 HR-V, 2018-2020 Fit, 2020-2022 CR-V Hybrid, 2017-2022 CR-V, 2017-2018, 2021 Civic Type R, 2017-2021 Civic hatchback, 2016-2020 Civic coupe, 2016-2022 Civic, 2017-2022 Accord Hybrid, and 2016-2022 Accord vehicles. The front passenger seat weight sensor may crack and short circuit, which can cause the air bags to deploy unintentionally during a crash.

Consequence & remedy

Consequence: Air bags that deploy unintentionally during a crash increase the risk of injury.

Remedy: Dealers will replace the seat weight sensors, free of charge. Owner notification letters were mailed July 7, 2026. Owners may contact Honda's customer service at 1-888-234-2138. Honda's numbers for this recall are BOL, WO9, OOA, WOM, XOH, NOC, POD, BOE, UOF, POB, EOG, AOI, QO8, TOJ, DO7, and SOK. This recall expands previous NHTSA recall number 24V064. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning May 29, 2026.

24V064000 · Air Bags:sensor:occupant Classification:front Passenger

Feb 1, 2024

Honda (American Honda Motor Co.) is recalling certain 2020-2022 Pilot, Accord, Civic sedan, HR-V, Odyssey, 2020 Civic coupe, Fit, 2021-2022 Civic hatchback, 2021 Civic Type R, Insight, 2020-2021 CR-V, CR-V Hybrid, Passport, Ridgeline, Accord Hybrid, 2020 Acura MDX, 2022 Acura MDX, 2020-2022 Acura RDX, and 2020-2021 Acura TLX vehicles. The front passenger seat weight sensor may crack and short circuit, failing to suppress the air bag as intended.

Consequence & remedy

Consequence: An air bag that deploys unintentionally during a crash can increase the risk of injury.

Remedy: Dealers will replace the seat weight sensors, free of charge. Owner notification letters were mailed March 28, 2024. This is a phased recall. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for these recalls are XHP and VHQ.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

2

DP26001 · All Wheel Drive Allegation

Opened Mar 6, 2026 · Closed Aug 4, 2026

Status: closed (inferred from source dates) · Power Train:automatic Transmission; Power Train:automatic Transmission:internal:shaft:output; Power Train:transfer Case (4-WHEEL Drive)

The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction.  However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied.  A denial report will be posted in the Federal Register.  The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances.  The Petition can be viewed at NHTSA.gov under ODI Number 11712885.

Additional source detail variants (3)

Power Train:automatic Transmission

The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction.  However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied.  A denial report will be posted in the Federal Register.  The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances.  The Petition can be viewed at NHTSA.gov under ODI Number 11712885.

Power Train:automatic Transmission:internal:shaft:output

The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction.  However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied.  A denial report will be posted in the Federal Register.  The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances.  The Petition can be viewed at NHTSA.gov under ODI Number 11712885.

Power Train:transfer Case (4-WHEEL Drive)

The Office of Defects Investigation (ODI) has completed its review of a Petition dated January 9, 2026, requesting an investigation into the loss of the optional all-wheel drive capability in model year (MY) 2021-2023 Acura TLX and MY 2022-2023 Acura MDX vehicles. The Petition alleges failures in the interfacing splines between the front wheel drive transaxle and the rear wheel drive power take off unit. Failure of these splines prevents the transfer of drive power to the rear axle, making the vehicle front wheel drive only. The Petition further alleges that this failure reduces vehicle directional control. Most traditional AWD systems utilize mechanical and passive measures. These systems have the tendency to distribute torque along the path of least resistance, such as a wheel that has lost contact with the ground or is on a low friction surface such as ice. To compensate for this, many manufacturers use the brake system to redirect torque to the wheels with more traction.  However, in this style of AWD system, a failed drive shaft or similar disconnection prior to the brakes often results in drive power being lost to the disconnected component. The consequence of this loss is the inability to maintain speed with surrounding traffic which increases the risks of collisions and injuries to the vehicle occupants. The Subject Vehicles are built upon a platform that was designed primarily as Front Wheel Drive (FWD). The SH-AWD system functions more as a performance enhancement feature rather than a stability feature. Even if the SH-AWD is nonoperational, the vehicles retain full mobility via FWD. In addition, the Vehicle Stability Assist (VSA) remains functional, ensuring directional stability through traditional engine and brake-based traction control. Although the condition raised by the Petitioner may degrade the vehicle’s performance characteristics, there is insufficient information to indicate a potential unreasonable safety risk. ODI reviewed 62 Vehicle Owner Questionnaires (VOQs) and several EWR Field Reports alleging the loss of SH-AWD and its impact on the driving dynamics of the subject vehicles. During its analysis, ODI determined that the failure is localized to the mechanical interface between the FWD transaxle and the PTU. Specifically, the failure is the shearing or stripping of the interfacing splined shafts between the FWD transaxle and the PTU, resulting in a permanent loss of torque transfer to the rear of the vehicle. Upon reviewing the technical details of SH-AWD, ODI has found that this failure does not result in any loss of motive power or lead to a loss of vehicle control. Several complaints indicated that the operators were unaware of the mechanical fault until encountering a low friction surface or the condition was identified by a technician during routine maintenance. The SH-AWD system lacks any form of direct feedback for monitoring real time torque transfer to the rear wheels. Therefore, the system will continue to display information indicating power is being supplied to the rear wheels even when power is actually only supplied to the front wheels. ODI’s review did not identify sufficient evidence to indicate that the misinformation has presented a safety issue in the field. ODI did not identify any reports of loss of motive power or vehicle control that could be attributed to the loss of SH-AWD. ODI is not aware of any crashes involving the Subject Vehicles that resulted from the loss of SH-AWD. After thoroughly assessing the material submitted by the Petitioner, consumer complaint information in NHTSA’s databases, and other relevant information already in possession of the Agency, NHTSA has not found sufficient evidence to indicate that the loss of AWD as alleged by the Petitioner is likely to present a safety related defect that would warrant a formal investigation. After full consideration of the available information, and in view of NHTSA’s enforcement priorities, the Petition is denied.  A denial report will be posted in the Federal Register.  The closing of the petition does not constitute a finding by NHTSA that a safety related defect does not exist, and the agency reserves the right to take additional action if warranted by future circumstances.  The Petition can be viewed at NHTSA.gov under ODI Number 11712885.

EA25004 · No Restart After Auto Start/stop Engages

Opened Mar 26, 2025 · No close date supplied

Status: open (inferred from source dates) · Engine And Engine Cooling:engine; Engine And Engine Cooling:engine:crank/camshaft Position Sensor; Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software; Engine And Engine Cooling:engine:hard Parts Internal/mechanical

On June 3, 2022, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE22005 after the agency received VOQs and several field reports concerning the Auto Idle Stop (AIS) feature on 2016-2019MY Honda Pilot vehicles. The complaints allege that the engine fails to restart on its own from a complete stop at a traffic light or road intersection with the AIS function engaged. The subject vehicles are equipped with a 3.5L engine with a 9-speed automatic transmission. On January 6, 2023, Honda released service bulletins 23-008 and 23-009. These service bulletins address the failure to restart issue in the 2016-2019MY Honda Pilot vehicles, as well as the 2015-2020 Acura TLX, 2016-2020 Acura MDX, 2019-2022 Honda Passport, and 2020-2023 Honda Ridgeline vehicles. The repair outlined in the service bulletins is a two-stage countermeasure to remedy the issue. The first stage is a Programmed Fuel Injection (“PGM-FI”) software update. The second stage is only deployed if the software update fails to remedy the issue. The second stage, depending on the model and model year, consists of replacement of the starter assembly, starter relays, and a valve adjustment. Additionally, Honda extended the warranty coverage to 10 years with unlimited mileage for vehicles requiring the second stage component replacement. ODI continues to receive complaints of the AIS failure to restart, with many complainants alleging the campaign countermeasures had been completed.NHTSA has reviewed Honda's Information Request Letter responses involving warranty claims, lawsuits, and consumer complaints in addition to ODI's own data. This Engineering Analysis is being opened to further consider the potential safety defect, including gathering additional data regarding Honda’s service campaign efficacy. ODI is additionally expanding the scope to encompass all vehicles addressed in Honda’s service bulletins 23-008 and 23-009 as well as newer model year vehicles, which are substantially similar to the vehicles covered by the service campaign. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

Additional source detail variants (4)

Engine And Engine Cooling:engine:crank/camshaft Position Sensor

On June 3, 2022, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE22005 after the agency received VOQs and several field reports concerning the Auto Idle Stop (AIS) feature on 2016-2019MY Honda Pilot vehicles. The complaints allege that the engine fails to restart on its own from a complete stop at a traffic light or road intersection with the AIS function engaged. The subject vehicles are equipped with a 3.5L engine with a 9-speed automatic transmission. On January 6, 2023, Honda released service bulletins 23-008 and 23-009. These service bulletins address the failure to restart issue in the 2016-2019MY Honda Pilot vehicles, as well as the 2015-2020 Acura TLX, 2016-2020 Acura MDX, 2019-2022 Honda Passport, and 2020-2023 Honda Ridgeline vehicles. The repair outlined in the service bulletins is a two-stage countermeasure to remedy the issue. The first stage is a Programmed Fuel Injection (“PGM-FI”) software update. The second stage is only deployed if the software update fails to remedy the issue. The second stage, depending on the model and model year, consists of replacement of the starter assembly, starter relays, and a valve adjustment. Additionally, Honda extended the warranty coverage to 10 years with unlimited mileage for vehicles requiring the second stage component replacement. ODI continues to receive complaints of the AIS failure to restart, with many complainants alleging the campaign countermeasures had been completed.NHTSA has reviewed Honda's Information Request Letter responses involving warranty claims, lawsuits, and consumer complaints in addition to ODI's own data. This Engineering Analysis is being opened to further consider the potential safety defect, including gathering additional data regarding Honda’s service campaign efficacy. ODI is additionally expanding the scope to encompass all vehicles addressed in Honda’s service bulletins 23-008 and 23-009 as well as newer model year vehicles, which are substantially similar to the vehicles covered by the service campaign. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

Engine And Engine Cooling:engine:engine Control Module (ecu/ecm):software

On June 3, 2022, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE22005 after the agency received VOQs and several field reports concerning the Auto Idle Stop (AIS) feature on 2016-2019MY Honda Pilot vehicles. The complaints allege that the engine fails to restart on its own from a complete stop at a traffic light or road intersection with the AIS function engaged. The subject vehicles are equipped with a 3.5L engine with a 9-speed automatic transmission. On January 6, 2023, Honda released service bulletins 23-008 and 23-009. These service bulletins address the failure to restart issue in the 2016-2019MY Honda Pilot vehicles, as well as the 2015-2020 Acura TLX, 2016-2020 Acura MDX, 2019-2022 Honda Passport, and 2020-2023 Honda Ridgeline vehicles. The repair outlined in the service bulletins is a two-stage countermeasure to remedy the issue. The first stage is a Programmed Fuel Injection (“PGM-FI”) software update. The second stage is only deployed if the software update fails to remedy the issue. The second stage, depending on the model and model year, consists of replacement of the starter assembly, starter relays, and a valve adjustment. Additionally, Honda extended the warranty coverage to 10 years with unlimited mileage for vehicles requiring the second stage component replacement. ODI continues to receive complaints of the AIS failure to restart, with many complainants alleging the campaign countermeasures had been completed.NHTSA has reviewed Honda's Information Request Letter responses involving warranty claims, lawsuits, and consumer complaints in addition to ODI's own data. This Engineering Analysis is being opened to further consider the potential safety defect, including gathering additional data regarding Honda’s service campaign efficacy. ODI is additionally expanding the scope to encompass all vehicles addressed in Honda’s service bulletins 23-008 and 23-009 as well as newer model year vehicles, which are substantially similar to the vehicles covered by the service campaign. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

Engine And Engine Cooling:engine:hard Parts Internal/mechanical

On June 3, 2022, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE22005 after the agency received VOQs and several field reports concerning the Auto Idle Stop (AIS) feature on 2016-2019MY Honda Pilot vehicles. The complaints allege that the engine fails to restart on its own from a complete stop at a traffic light or road intersection with the AIS function engaged. The subject vehicles are equipped with a 3.5L engine with a 9-speed automatic transmission. On January 6, 2023, Honda released service bulletins 23-008 and 23-009. These service bulletins address the failure to restart issue in the 2016-2019MY Honda Pilot vehicles, as well as the 2015-2020 Acura TLX, 2016-2020 Acura MDX, 2019-2022 Honda Passport, and 2020-2023 Honda Ridgeline vehicles. The repair outlined in the service bulletins is a two-stage countermeasure to remedy the issue. The first stage is a Programmed Fuel Injection (“PGM-FI”) software update. The second stage is only deployed if the software update fails to remedy the issue. The second stage, depending on the model and model year, consists of replacement of the starter assembly, starter relays, and a valve adjustment. Additionally, Honda extended the warranty coverage to 10 years with unlimited mileage for vehicles requiring the second stage component replacement. ODI continues to receive complaints of the AIS failure to restart, with many complainants alleging the campaign countermeasures had been completed.NHTSA has reviewed Honda's Information Request Letter responses involving warranty claims, lawsuits, and consumer complaints in addition to ODI's own data. This Engineering Analysis is being opened to further consider the potential safety defect, including gathering additional data regarding Honda’s service campaign efficacy. ODI is additionally expanding the scope to encompass all vehicles addressed in Honda’s service bulletins 23-008 and 23-009 as well as newer model year vehicles, which are substantially similar to the vehicles covered by the service campaign. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

Engine And Engine Cooling:engine

On June 3, 2022, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE22005 after the agency received VOQs and several field reports concerning the Auto Idle Stop (AIS) feature on 2016-2019MY Honda Pilot vehicles. The complaints allege that the engine fails to restart on its own from a complete stop at a traffic light or road intersection with the AIS function engaged. The subject vehicles are equipped with a 3.5L engine with a 9-speed automatic transmission. On January 6, 2023, Honda released service bulletins 23-008 and 23-009. These service bulletins address the failure to restart issue in the 2016-2019MY Honda Pilot vehicles, as well as the 2015-2020 Acura TLX, 2016-2020 Acura MDX, 2019-2022 Honda Passport, and 2020-2023 Honda Ridgeline vehicles. The repair outlined in the service bulletins is a two-stage countermeasure to remedy the issue. The first stage is a Programmed Fuel Injection (“PGM-FI”) software update. The second stage is only deployed if the software update fails to remedy the issue. The second stage, depending on the model and model year, consists of replacement of the starter assembly, starter relays, and a valve adjustment. Additionally, Honda extended the warranty coverage to 10 years with unlimited mileage for vehicles requiring the second stage component replacement. ODI continues to receive complaints of the AIS failure to restart, with many complainants alleging the campaign countermeasures had been completed.NHTSA has reviewed Honda's Information Request Letter responses involving warranty claims, lawsuits, and consumer complaints in addition to ODI's own data. This Engineering Analysis is being opened to further consider the potential safety defect, including gathering additional data regarding Honda’s service campaign efficacy. ODI is additionally expanding the scope to encompass all vehicles addressed in Honda’s service bulletins 23-008 and 23-009 as well as newer model year vehicles, which are substantially similar to the vehicles covered by the service campaign. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.