1991 ACURA......AUTOMATIC SEATBELT DOES NOT WORK. CONSUMER TOOK VEHICLE TO A MECHANIC AND THE EMPLOYEE SAID THAT THE SEATBELT SHOULD BE REPLACED FOR FREE. *TR
1990 Acura Integra
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 1990 Acura Integra do not stand out strongly from the model-year median of 21.
About this comparison →How this year compares
Owner complaints by model year
Compare all Integra years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 32 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Seat Belts. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Power Train. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Seat Belts complaints
10 reportsTHE SEAT-BELT BUTTON ON MY 1990 ACURA INTEGRA IS BROKEN. IT FITS THE EXACT DESCRIPTION OF SOMETHING THAT HAS BEEN RECALLED IN THE PAST, BUT SINCE MY CAR HAS ALREADY BEEN RECALLED IN THE PAST, ACURA/HONDA DOES NOT CARE THAT IT IS THE EXACT SAME PROBLEM. *JB
DRIVER'S SIDE LAP BELT BUCKLE ASSEMBLY FAILS TO STAY LOCKED. RECALL 95V103001 REPAIRS WERE PERFORMED IN 1996. DEALERSHIP HAS NOT EXAMINED VEHICLE FOR CURRENT PROBLEM. *AK CONSUMER STATES SHOULDER BELT ON DRIVERS SIDE IS DEFECTIVE AND LOOSE. *SLC
AUTOMATIC SEAT BELT SUDDENLY RELEASES IN MULTIPLE SITUATIONS: UPON SUDDEN STOPS, WHILE DRIVING AT VERIOUS SPEEDS, GOING OVER "SMALL" BUMPS IN ROAD. SOMEIMES AUTOMATIC SEATBELT WON'T ENGAGE UPON SHUTTING DOOR. PRIOR TO THIS THE SEAT BELT HAD THE OPPOSITE PROBLEM...SINCE 1991 SEATBELT OCCASIONALLY TIGHTENED AND PINNED DRIVER TO T…
Read full complaint
AUTOMATIC SEAT BELT SUDDENLY RELEASES IN MULTIPLE SITUATIONS: UPON SUDDEN STOPS, WHILE DRIVING AT VERIOUS SPEEDS, GOING OVER "SMALL" BUMPS IN ROAD. SOMEIMES AUTOMATIC SEATBELT WON'T ENGAGE UPON SHUTTING DOOR. PRIOR TO THIS THE SEAT BELT HAD THE OPPOSITE PROBLEM...SINCE 1991 SEATBELT OCCASIONALLY TIGHTENED AND PINNED DRIVER TO THE SEAT NEEDING TO BE RELEASED BY THE EMERGENCY RELEASE BUTTON..
VEHICLE SKIDDED ON AN ICE PATCH, CAUSING A COLLISION. UPON IMPACT, THE DRIVER WAS KILLED BECAUSE THE AUTOMATIC SEAT BELT RETRACTED WHEN THE DOOR BECAME SLIGHTLY AJAR. DEALER HAS NOT BEEN NOTIFIED. *AK
LEFT SIDE REAR SEAT BUCKLE COMES UNLATCHED WHEN USED WITH A BOOSTER SEAT. PLEASE DESCRIBE DETAILS. *AK
POWER SEAT BELT MOTOR FAILED PRIOR TO RECALL. *SD
CHILDPROOF MECHANISM ON CHILD SAFETY LOCKS BROKEN, CAUSING DOOR TO BE INOPERABLE FROM INSIDE OF VEHICLE.
THE PASSENGER AUTOMATED SEAT BELT, AFTER POSITIONING ITSELFACROSS OCCUPANT'S CHEST SHOULDER, IS NOT TIGHT/BUT HAS SLACK. *AK
DRIVER SIDE LAP BUCKLE WHEN ENGAGED JAMS WHEN PRESSING THE RELEASE MECHANISM. INTERMITTENT. TT
Official recalls
195V103001 · Seat Belts:front:buckle Assembly
May 24, 1995
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Consequence & remedy
Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES. CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. CHECK THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUG ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, THEN PRESS THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS ANY SIGN OF BREAKAGE OR CRACKING, OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, PROMPTLY CONTACT YOUR AUTHORIZED HONDA/ACURA DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT THE FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA94035 · Seat Belt Buckle Failure
Opened Oct 27, 1994 · Closed Jul 31, 1995
Status: closed (inferred from source dates) · Seat Belts:front:buckle Assembly
There is no summary currently available
PE91043 · Auto. Shoulder Belt Fails
Opened Feb 7, 1991 · Closed Jun 28, 1991
Status: closed (inferred from source dates) · Seat Belts
There is no summary currently available
Illustration